標準編號:	GB/T 775.1-2006
中文名稱:	絕緣子試驗方法 第1部分:一般試驗方法
英文名稱:	Test method for insulators - Part 1: General test methods
中標分類:	K48    絕緣子
行業分類:	GB    國家標準
ICS分類:	29.080.10 29.080.10    絕緣子 29.080.10
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2006-2-15
實施日期:	2006-6-1
標準狀態:	abolished
作廢日期:	2017-12-15
替代舊標準:	GB/T 775.1-1987 絕緣子試驗方法 第1部分:一般試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	600.0
交付時間:	付款后 1~3 個工作日

1 Scope This Part specifies the sample installation and test methods for general test of insulators. This Part is applicable to the appearance and dimension inspection, shape and position deviation inspection, porosity test and temperature cycling test for porcelain and glass insulators (including sleeves, support insulators, insulating coat of electrical products, line insulator strings and their elements). 2 Normative References The following normative documents contain provisions which, through reference in this Part of GB/T 775, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.

Contents Foreword 1 Scope 2 Normative References 3 Terms and Definitions 4 Appearance and Dimension Inspection 4.1 Appearance Inspection 4.2 Dimension Inspection 5 Inspection for Shape and Position Deviation 5.1 Parallelism Inspection of End Face 5.2 Planeness Inspection 5.3 Inspection for the Maximum Axial Displacement of Hole Circles 5.4 Straightness Inspection for Axes 5.5 Inspection for Umbrella Edge Deformation 5.6 Roundness Inspection 5.7 Angular Deflection Inspection for Installation Holes 5.8 Roughness Inspection 5.9 Other Test Methods for Shape and Position Deviation 6 Porosity Test 6.1 Preparation of Test Blocks 6.2 Preparation of Test Solution 6.3 Test Procedures 6.4 Result Judgment 7 Temperature Cycling Test 7.1 Test Water 7.2 Test Procedures 7.3 Result Judgment