GB/T 7247.5-2024 Safety of laser products - Part 5: Manufacturer’s checklist for GB/T 7247.1
1 Scope
This document is intended for use by manufacturers of laser products and their agents to establish that each new or modified design complies with the requirements of GB/T 7247.1-2024. This document is used in conjunction with GB/T 7247.1-2024, as relevant clauses and subclauses in GB/T 7247.1-2024 are referred to in the text.
This document is applicable to laser products as described in GB/T 7247.1-2024.
The layout of the checklist is intended only as a guide. Manufacturers and examiners are encouraged to produce their own document, omitting questions and clauses that are not relevant to the types of product under examination, but noting in the appropriate positions the numbers of such clauses stating, for example: "Subclause 9.11.1: Question omitted - not applicable".
The manufacturer is responsible for ensuring that the examiner is a person competent in the inspection and classification of laser products.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 7247.1-2024 Safety of laser products - Part 1: Equipment classification and requirements (IEC 60825-1:2014, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 7247.1 apply.
4 Identification
4.1 Details of the examiner
Identification of the person responsible for examining and classifying the product under inspection:
Name: Position:
print full name print full title
If the above named person is not an employee of the manufacturer of the laser product to be examined, state the details of the examiner’s employer or organization:
Organization:
Address:
Date of
examination:
4.2 Laser product
