1 Scope
1.1 This standard specifies the installation, test parameters and test procedure and other contents of test sample during vibration (sinusoidal) test for electrical installations in ships.
1.2 This standard is applicable to the vibration (sinusoidal) test for electrical installations in ships.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 2422-1995 Environmental Testing for Electric and Electronic Products Terms and Definitions (eqv IEC 60068-5-2:1990)
3 Definitions
The terminologies used in this standard shall be defined according to GB/T 2422.
Foreword I
1 Scope
2 Normative References
3 Definitions
4 Installation of Test Samples
5 Test Parameters
6 Test Procedure
7 Performance Evaluation
