Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
1 Scope
This document specifies requirements for mains socket-outlet mounted nightlights for use with electric light sources, on supply voltages not exceeding 250 V a.c. 50/60 Hz.
This document applies to mains socket-outlet mounted nightlights with a supply voltage not exceeding 250 V AC 50/60 Hz using electric light sources.
This document is to be read in conjunction with Part 1[1) Part 1 referred to in this document means GB/T 7000.1.]1).
Note: This document does not cover luminaires for surveillance lighting
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 7000.1 Luminaires - Part 1: General requirements and tests (GB/T 7000.1-2023, IEC 60598-1:2020, MOD)
GB/T 16842-2016 Protection of persons and equipment by enclosures - Probe for verification (IEC 61032:1997, IDT)
IEC TR 60083 IEC Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
IEC 60227 (all parts) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
Note: GB/T 5023 (all parts) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V (All Parts)
IEC 60884-1 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
Note: GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements (IEC 60884-1:2013, MOD)
IEC 60950-1 Information technology equipment - Safety - Part 1: General requirements)
IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Note: GB/T 17626.5-2019 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test (IEC 61000-4-5:2014, IDT)
3 Terms and definitions
Foreword i
Introduction iv
1 Scope
2 Normative references
3 Terms and definitions
4 General test requirements
5 Classification
6 Marking
7 Construction
8 External and internal wiring
9 Provision for earthing
10 Protection against electric shock
11 Resistance to dust, solid objects and moisture
12 Insulation resistance and electric strength
13 Creepage distances and clearance
14 Endurance test and thermal test
15 Resistance to heat, fire and tracking
16 Screw terminals
17 Screwless terminals and electrical connections
