標準編號:	GB/T 67-2016
中文名稱:	開槽盤頭螺釘
英文名稱:	Slotted pan head screws
中標分類:	J13    緊固件
行業分類:	GB    國家標準
ICS分類:	21.060.10 21.060.10    螺栓、螺釘、螺柱 21.060.10
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2016-02-24
實施日期:	2016-6-1
標準狀態:	valid
替代舊標準:	GB/T 67-2008 開槽盤頭螺釘
翻譯語言:	英文
文件格式:	PDF
中文字符數:	7000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

Slotted Pan Head Screws 1 Scope This standard specifies types, dimensions, specifications and designation of slotted pan head screws. This standard is applicable to slotted pan head screws of product grade A and with thread specification from M1.6 to M10, with property class 4.8, 5.8, A2-50, A2-70, CU2, CU3 and AL4. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 90.1 Fasteners — Acceptance Inspection (GB/T 90.1-2002, ISO 3269:2000, IDT) GB/T 90.2 Fasteners — Marking and Packaging GB/T 193 General Purpose Metric Screw Threads — General Plan (GB/T 193-2003, ISO 261:1998, MOD) GB/T 1237 Designation System for Fasteners (GB/T 1237-2000, eqv ISO 8991:1986) GB/T 3098.1 Mechanical Properties of Fasteners — Bolts, Screws and Studs (GB/T 3098.1-2010, ISO 898-1:2009, MOD) GB/T 3098.6 Mechanical Properties of Fasteners — Stainless Steel Bolts, Screws and Studs (GB/T 3098.6-2014, ISO 3506-1:2009, MOD) GB/T 3098.10 Mechanical Properties of Fasteners — Bolts, Screws, Studs and Nuts Made of Non-ferrous Metals (GB/T 3098.10-1993, eqv ISO 8839:1986) GB/T 3103.1 Tolerances for Fasteners — Bolts, Screws, Studs and Nuts (GB/T 3103.1-2002, idt ISO 4759-1:2000) GB/T 5267.1 Fasteners — Electroplated Coatings (GB/T 5267.1-2002, ISO 4042:1999, IDT) GB/T 5267.2 Fasteners — Non-electrolytically Applied Zinc Flake Coatings (GB/T 5267.2-2002, ISO 10683: 2000, IDT) GB/T 5267.4 Passivation of Corrosion-resistant Stainless-steel Fasteners (GB/T 5267.4-2009, ISO 16048:2003, IDT) GB/T 5276 Fasteners — Bolts, Screws, Studs and Nuts — Symbols and Descriptions of Dimensions (GB/T 5276-2015, ISO 225:2010, MOD) GB/T 5779.1 Fasteners — Surface Discontinuities — Bolts, Screws and Studs for General Requirements (GB/T 5779.1-2000, idt ISO 6157-1:1988) GB/T 9145 General Purpose Metric Screw Threads — Limits of Sizes for the Screw Threads of Medium Quality and Preferable Plan (GB/T 9145-2003, ISO 965-2:1998, MOD) GB/T 16938 Fasteners — General Requirements for Bolts, Screws, Studs and Nuts (GB/T 16938-2008, ISO 8992:2005, IDT) 3 Dimensions For types and dimensions of screws, see Figure 1 and Table 1. Symbols and descriptions of dimensions are specified in GB/T 5276.

Foreword II 1 Scope 2 Normative References 3 Dimensions 4 Specifications and Reference Standards 5 Designation