標準編號:	GB/T 5720-2008
中文名稱:	O形橡膠密封圈試驗方法
英文名稱:	Test methods for rubber O-rings
中標分類:	G43    橡膠密封件
行業分類:	GB    國家標準
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2008-6-4
實施日期:	2008-12-1
標準狀態:	valid
替代舊標準:	GB/T 5720-1993 O形橡膠密封圈試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	480.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies test methods for size measurement , hardness, tensile property, hot air aging, constant deformation compression set, corrosion and liquid resistance, density, shrinkage , low temperature test and compression relaxation of solid vulcanized rubber O-ring. This standard is applicable to solid vulcanized rubber O-ring (hereinafter referred to as O-ring). 2 Normative References The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to this part are encouraged to research whether the latest editions of these documents may be applied. For undated references, the latest edition referred to apply. GB/T 528-1998 Rubber，Vulcanized or Thermoplastic-Determination of Tensile Stress-Strain Properties (eqv ISO 37:1994) GB/T 533-1991 Rubber Vulcanized or Thermoplastic-Determination of Density (ISO 2781:2007, IDT) GB/T 1690-1992 Rubber, Vulcanized-Determination of the Effect of Liquids (neq ISO 1817) GB/T 2941-2006 Rubber-General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods (ISO 23529:2004, IDT) GB/T 3452.2-2007 Fluid Power Systems-O-rings-Part 2: Quality Acceptance Criteria (ISO 3601-3:2005, IDT) GB/T 3512-2001 Rubber, Vulcanized or Thermoplastic-Accelerated Ageing and Heat Resistance Tests-Air-oven Method(eqv ISO 188:1998) GB/T 6031-1998 Rubber, Vulcanized or Thermoplastic-Determination of Hardness (Hardness between 10IRHD and 100IRHD) (idt ISO 48:1994) GB/T 7758-2002 Rubber, vulcanized--Determination of Low-Temperature Characteristics-Temperature-Retraction Procedure (TR Test) (ISO 2927:1997, IDT) GB/T 7759-1996 Rubber, Vulcanized or Thermoplastic-Determination of Compression Set at Ambient Elevated or Low Temperatures (eqv ISO 815:1991) GB/T 13643-1992 Rubber, Vulcanized or Thermoplastic-Determination of Compressions Tress Relaxation(Rings) (eqv ISO 6059:1987) HG/T 2369-1992 Rubber Plastic Tensile Tester Technical Conditions 3 Requirements for Sample and Test Condition 3.1 Requirements for sample 3.1.1 Sample is prepared according to the requirements of GB/T 2941-2006. 3.1.2 Appearance quality of the sample shall meet the requirements of GB/T 3452.2-2007, Grade N. 3.1.3 The samples tested for hardness, tensile property, hot air aging, constant deformation compression set, corrosion test, liquid resistance, density, shrinkage rate, low temperature test and compression stress relaxation are detailed in 5.1.2, 5.2.2, 5.3.2, 5.4.2, 5.5.2, 5.6.2, 5.7.2, 5.8.2, 5.9.2 and GB/T 13643-1992, 4.1.3. 3.2 Test condition Environmental conditioning of sample and test temperature and time shall be carried out in accordance with GB/T 2941-2006.

Foreword i 1 Scope 2 Normative References 3 Requirements for Sample and Test Condition 4 Measurement of Sample Size 5 Test Procedures 6 Test Report