標準編號:	GB/T 5660-2013
中文名稱:	軸向吸入離心泵 底座尺寸和安裝尺寸
英文名稱:	End-suction Centrifugal Pumps - Baseplate and Installation Dimensions
中標分類:	J71    泵
行業分類:	GB    國家標準
ICS分類:	23.080 23.080    泵 23.080
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2013-12-17
實施日期:	2014-10-1
標準狀態:	valid
替代舊標準:	GB/T 5660-1985 軸向吸入離心泵底座尺寸和安裝尺寸
翻譯語言:	英文
文件格式:	PDF
中文字符數:	12000 字
翻譯價格(元):	720.0
交付時間:	付款后 1 個工作日

End-suction centrifugal pumps - Baseplate and installation dimensions 1 Scope This standard specifies the baseplate and installation dimensions for end-suction centrifugal pumps (hereinafter referred to as pumps). This standard is applicable to pumps and Y2 and Y3 series three-phase asynchronous motors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 5662 End-suction centrifugal pumps (rating 1.6 MPa) - Designation, nominal duty point and dimensions JB/T 8680 Specification for Y2 series (IP54) three-phase asynchronous motor (frame size 63~355) JB/T 10447 Specification for Y3 series (IP55) three-phase induction motor (frame size 63~355) 3 Baseplate and installation dimensions 3.1 The dimensions of pumps shall meet the requirements of GB/T 5662. The installation dimensions of motors shall meet the requirements of JB/T 8680 and JB/T 10447. 3.2 the baseplate No. and dimensions are shown in the Table 1 and Figure 1. The basic installation dimensions are shown in Figure 2. ?

Foreword i 1 Scope 2 Normative references 3 Baseplate and installation dimensions Bibliography