標準編號:	GB/T 5130-1997
中文名稱:	電氣用熱固性樹脂工業硬質層壓板試驗方法
英文名稱:	Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose
中標分類:	K10    電工材料和通用零件綜合
行業分類:	GB    國家標準
ICS分類:	29.035.20 29.035.20    塑料和橡膠絕緣材 29.035.20
發布機構:	國家技術監督局
發布日期:	1997-06-03
實施日期:	1998-5-1
標準狀態:	superseded
被新標準替代:	GB/T 1303.2-2009 電氣用熱固性樹脂工業硬質層壓板 第2部分：試驗方法
被替代日期:	2009-12-1
作廢日期:	2009-12-01
替代舊標準:	GB 5130-1985
翻譯語言:	英文
文件格式:	PDF
中文字符數:	13000 字
翻譯價格(元):	780.0
交付時間:	付款后 1 個工作日

Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose 1 Scope This standard specifies the test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose. It is applicable to industrial rigid laminated sheets based on thermosetting resins for electrical purpose. 2 Normative references The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. At the time of publication, all the editions listed are valid. All normative documents are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. GB 1033-86 Test method for density and relative density of plastics GB 1034-86 Plastics - Determination of water absorption GB/T 1040-92 Plastics - Determination of tensile properties GB/T 1041-92 Plastics - Determination of compressive properties GB/T 1043-93 Plastics - Determination of charpy impact strength of rigid materials GB 1408-89 Methods of test for electric strength of solid insulating materials - Tests at power frequencies GB 1409-89 Methods for the determination of the permittivity and dielectric dissipation factor of solid electrical insulating materials at power, audio and radio frequencies including metre wavelengths GB/T 1843-1996 Plastics - Determination of izod impact strength GB 2536-90 Transformer oils GB 4207-84 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions GB 6553-86 Test methods for evaluating resistance to tracking and erosion of electrical insulating material used under severe ambient conditions GB 9341-88 Plastics - Determination of flexural properties GB 10064-88 Methods of test for the determination of the insulation resistance of solid insulating materials GB 10580-89 Standard conditions for use prior to and during the testing of solid insulating materials GB 10582-89 Test methods for determining electrolytic corrosion with insulating materials GB 11020-89 Test methods for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source GB 11026.1-89 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 1: General guidelines for ageing procedures and evaluation of test results 3 Specimen pretreatment and test environmental conditions Unless otherwise specified, the specimen shall be treated for at least 24h in standard atmosphere B (temperature 23℃±2℃, relative humidity 45% ~ 55%) according to GB 10580.

ntents Foreword i IEC Foreword iii 1 Scope 2 Normative references 3 Specimen pretreatment and test environmental conditions 4 Dimensions 5 Mechanical test 6 Electrical test 7 Thermal performance test 8 Physical and chemical properties