標準編號:	GB/T 5104-2008
中文名稱:	漸開線花鍵滾刀 基本型式和尺寸
英文名稱:	The basic types and dimensions of hobs for involute splines
中標分類:	J41    刀具
行業分類:	GB    國家標準
ICS分類:	25.100.20 25.100.20    銑刀 25.100.20
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2008-8-28
實施日期:	2009-3-1
標準狀態:	valid
替代舊標準:	GB/T 5105-2004 45°壓力角漸開線花鍵滾刀基本型式和尺寸 GB/T 5104-2004 30°壓力角漸開線花鍵滾刀基本型式和尺寸
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	290.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the basic types and dimensions of hobs for integral involute splines with the pressure angle of 30° and the modules of 0.5 mm to 10 mm and those with the pressure angle of 45° and the modules of 0.25 mm to 2.50 mm. This standard is applicable to hobs for straight cylindrical involute splines with basic rack profile as required in GB/T 3478.1 and dimensions as required in GB/T 3478.4 or GB/T 3478.2. Hobs with the pressure angle of 30° are of A, B and C precision, while hobs with the pressure angle of 45° are of C precision. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition applies. GB/T 3478.1 Straight cylindrical involute splines—Modules, basic rack profiles and tolerances (GB/T 3478.1-1995, eqv ISO 4156:1981) GB/T 3478.2 Straight cylindrical involute splines—30° pressure angle dimensions tables (GB/T 3478.2-1995, neq ISO 4156:1981) GB/T 3478.4 Straight cylindrical involute splines—45° pressure angle dimensions tables (GB/T3478.4-1995, neq ISO 4156:1981) GB/T 6132 Milling cutters—Interchangeability dimensions for cutter arbors (GB/T 6132-2006, ISO 240: 1994, IDT) 3 Types and dimensions 3.1 There are two basic types of hobs for involute splines with the pressure angle of 30°: Type I and Type II. Type I is a hob for flat top, which is suitable for machining external splines with flat roots; Type II is a hob for a circular top, which is suitable for machining external splines with fillet root.

Foreword i 1 Scope 2 Normative references 3 Types and dimensions 4 Example of designation Annex A (Informative) Calculated dimensions of hobs Annex B (Informative) Axial profile dimensions of hobs