標準編號:	GB/T 4661-2015
中文名稱:	滾動軸承 圓柱滾子
英文名稱:	Rolling bearings―Cylindrical rollers
中標分類:	J11    滾動軸承
行業分類:	GB    國家標準
ICS分類:	21.100.20 21.100.20    滾動軸承 21.100.20
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2015-12-31
實施日期:	2016-7-1
標準狀態:	valid
替代舊標準:	GB/T 4661-2002 滾動軸承 圓柱滾子
翻譯語言:	英文
文件格式:	PDF
中文字符數:	8000 字
翻譯價格(元):	260.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the dimensions, technical requirements, inspection and measurement methods, inspection rules, as well as marking, packaging and storage of finished cylindrical steel roller for rolling bearing. This standard is applicable to the cylindrical steel roller (hereinafter referred to as "roller") for auxiliary use with rolling bearing and commodity use. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 4199-2003 Rolling Bearings—Tolerances—Definitions GB/T 6930-2002 Rolling Bearings—Vocabulary GB/T 7235 Geometrical Product Specifications (GPS)—Methods for the Assessment of Departure from Roundness—Measurement of Variations in Radius GB/T 7811 Rolling Bearings—Symbols for Physical Quantities GB/T 8597 Rolling Bearings—Rust Proof Packaging GB/T 18254 High-carbon Chromium Bearing Steel GB/T 18579 High-carbon Chromium Bearing Steel Wires GB/T 24608 Inspection Rules for Rolling Bearings and Commercial Parts GB/T 24632.1 Geometrical Product Specifications(GPS)—Roundness—Part 1: Vocabulary and Parameters of Roundness JB/T 1255 Rolling Bearings—High-carbon Chromium Bearing Steel Parts—Specification for Heat Treatment JB/T 6641 Rolling Bearings—Residual Magnetism and Its Assessment Method JB/T 7051 Rolling Bearing Parts—Methods for the Measurement and Assessment of Surface Roughness JB/T 7361 Rolling Bearings—Test Method for Hardness of Parts 3 Terms and Definitions For the purpose of this standard, the following terms and definitions and those specified in GB/T 4199 and GB/T 6930 apply. 3.1 Nominal roller diameter Dw The value used to identify the diameter of roller. [GB/T 6930—2002, Definition 05.05.01]

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Symbols 5 Dimensions 6 Technical Requirements 7 Inspection and Measurement Methods 8 Inspection Rules 9 Marking 10 Packaging and Storage Appendix A (Informative) Roller Diameter Gauge and Grouping Principles Appendix B (Informative) Roller Length Gauge and Grouping Principles Appendix C (Informative) Evaluation Method of Deviation from Circular Form of Roller outside Diameter Surface