GB/T 45364-2025 General technical requirements for domestic vacuum suction cups
1 Scope
This document defines the terms and definitions of domestic vacuum suction cups, specifies the classification, technical requirements, inspection rules, markings, packaging, transportation and storage, and describes the corresponding test methods.
This document is applicable to the production, inspection and sales of domestic vacuum suction cups (hereinafter referred to as "products").
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 4100-2015 Ceramic tiles
GB/T 6461 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 16825.1 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
adsorbent
disc-shaped component made of materials such as plastic and rubber, which utilizes negative pressure between itself and the adsorbed interface to adsorb itself onto the interface
Note: See Figure 1 for the schematic diagram of the adsorbent.
Figure 1 Schematic diagram of the adsorbent
3.2
domestic vacuum suction cup
product that uses an adsorbent (3.1) in conjunction with other components to change the vacuum degree between the adsorbent and the adsorbed interface by pressing, pulling, twisting, etc., for fixing, hanging, load-bearing, and other daily life scenarios
4 Classification
It can be divided into ordinary grade and high strength grade according to adsorption strength.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
Annex A (Informative) Structure diagram for the domestic vacuum suction cups
