標準編號:	GB/T 45360-2025
中文名稱:	棉及化纖純紡、混紡印染布檢驗、標志與包裝
英文名稱:	Inspection, marking and packing for printed and dyed fabric of cotton, man-made fibres and blends
行業分類:	GB    國家標準
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2025-02-28
實施日期:	2027-3-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	18000 字
翻譯價格(元):	1260.0
交付時間:	付款后 1~3 個工作日

GB/T 45360-2025 Inspection, marking and packing for printed and dyed fabric of cotton, man-made fibres and blends 1 Scope This document specifies the inspection, marking, and packing for printed and dyed fabric of cotton, man-made fibres, and blends. This document is applicable to all types of bleached, dyed, and printed woven fabrics produced from yarns made of cotton, man-made fibres or blends, and blends of cotton, man-made fibres with other fibres. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 4456 Polyethylene blown film for packaging applications GB/T 4666 Textiles - Fabrics - Determination of width and length GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel GB/T 6543 Single and double corrugated boxes for transport packages GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 8946 General technical requirements of plastic woven sack GB/T 12464 Wooden boxes GB/T 22865 Kraft GB/T 36973 Textiles - Woven fabric descriptions BB/T 0032 Paper cores QB/T 4010 PET strapping 3 Terms and definitions No terms or definitions are listed in this document. 4 Inspection 4.1 General 4.1.1 The inspection content includes intrinsic quality, appearance quality, length, marking, and packing. 4.1.2 The supplier shall issue a product inspection certificate based on the results of the product quality inspection. 4.1.3 The purchaser shall, within 7 d after receiving the product or within the time agreed by both parties, accept the product based on the sales contract between the supplier and the purchaser or the product standard and notify the supplier of the acceptance result in time. If the supplier fails to reply within 7 d or the time agreed by both parties, the inspection result of the purchaser shall prevail. 4.1.4 If the purchaser, due to constraints, fails to notify the supplier of the acceptance results within 7 d after receiving the product or within the time agreed by both parties, the products shall be accepted based on the supplier's inspection results. 4.2 Sampling method 4.2.1 Products of the same raw material, variety and specifications, process, and production batch number shall be regarded as one inspection batch or batched according to the sales contract. 4.2.2 Samples for intrinsic quality, appearance quality, length, marking, and packing inspection shall be randomly taken from the inspection batch. 4.2.3 A re-inspection shall be conducted by taking the same number of samples from the same batch of products, and the results of the re-inspection shall be considered as the inspection results for that batch. 4.2.4 The sampling plans agreed upon by the supplier and the purchaser, if any, shall be implemented in accordance with the agreement. 4.3 Inspection methods 4.3.1 The inspection shall be conducted in accordance with the corresponding product standards. 4.3.2 The inspection method agreed upon by the supplier and the purchaser, if any, shall be implemented in accordance with the agreement. 4.4 Inspection evaluation 4.4.1 Intrinsic quality 4.4.1.1 Sampling requirements for intrinsic quality inspection: According to the assessment items stipulated by the product standards or sales contract, no fewer than three samples shall be taken per inspection batch, each from different packages, and the samples shall be representative. Each sample shall be sized to meet the requirements of all test items and be cut from a position more than 1 m from the end of the fabric. 4.4.1.2 Determination of results for intrinsic quality: The batch is deemed to be acceptable if the inspection results of each sample meet the requirements of the product standards, and the average of the test results of all the samples shall be taken as the test results of the batch of products (for colour fastness, the lowest grade shall be taken as the test results of the batch of products ).

Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Inspection 5 Marking 6 Packing 7 Others Annex A (Normative) Stipulation of false cut through and combined piece Annex B (Normative) Stipulation of bag made of odds and ends of cloth

棉及化纖純紡、混紡印染布檢驗、標志與包裝 1 范圍 本文件規定了棉及化纖純紡、混紡印染布檢驗、標志與包裝。 本文件適用于以棉、化纖純紡或混紡，棉、化纖與其他纖維混紡的紗線為原料，機織生產的各類漂白、染色和印花的印染布。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 4456 包裝用聚乙烯吹塑薄膜 GB/T 4666 紡織品 織物長度和幅寬的測定 GB/T5296.4 消費品使用說明第4部分：紡織品和服裝 GB/T 6543 運輸包裝用單瓦楞紙箱和雙瓦楞紙箱 GB/T 8170 數值修約規則與極限數值的表示和判定 GB/T 8946 塑料編織袋通用技術要求 GB/T 12464 普通木箱 GB/T 22865 牛皮紙 GB/T 36973 紡織品 機織物描述 BB/T 0032 紙管 QB/T 4010 聚酯打包帶 3 術語和定義 本文件沒有需要界定的術語和定義。 4 檢驗 4.1 通則 4.1.1 檢驗內容包括內在質量、外觀質量、長度、標志與包裝。 4.1.2 供方應根據產品質量檢驗結果，出具產品檢驗合格證明。 4.1.3 需方應在收到產品?d或雙方約定時間內，根據供需雙方買賣合同或產品標準，對產品進行驗收，并將驗收結果及時通知供方，供方在7d或雙方約定時間內沒有答復，應按需方檢驗結果為準。 4.1.4 需方如因條件限制，未在收到產品后7d內或雙方約定時間內通知供方驗收結果，應按供方檢驗結果收貨。 4.2 抽樣方法 4.2.1 同一原料、品種規格、工藝與生產批號的產品作為一個檢驗批，或按買賣合同約定進行組批。 4.2.2 內在質量、外觀質量、長度、標志與包裝檢驗樣本均應從檢驗批中隨機抽取。 4.2.3 復驗應在該批產品中再抽驗相同數量進行檢驗，并以復驗的檢驗結果作為該批產品的檢驗結果。 4.2.4 供需雙方另有抽樣方案約定的按其約定執行。 4.3 檢驗方法 4.3.1 按相應的產品標準執行。 4.3.2 供需雙方另有檢驗方法約定的按其約定執行， 4.4 檢驗評定 4.4.1 內在質量 4.4.1.1 內在質量的抽樣要求：按產品標準或買賣合同約定的考核項目要求，以檢驗批為單位，每批抽取不應少于3塊樣品，分別在不同包中抽取，取樣應具有代表性。每塊樣品大小應滿足全部試驗項目需要，在離布端1m以上剪取。 4.4.1.2 內在質量的結果判定：每塊樣品的檢驗結果均符合產品標準要求的判定全批合格，以全部抽驗樣品試驗結果的平均值作為該批產品的檢驗結果(色牢度以最低等級作為該批產品的檢驗結果)。