標準編號:	GB/T 45327-2025
中文名稱:	富鋰鐵酸鋰
英文名稱:	Lithium-rich lithium iron oxide
行業分類:	GB    國家標準
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2025-02-28
實施日期:	2025-9-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	18000 字
翻譯價格(元):	1260.0
交付時間:	付款后 1~3 個工作日

GB/T 45327-2025 Lithium-rich lithium iron oxide 1 Scope This document specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transport, storage and accompanying documents, and order contents of lithium-rich lithium iron oxide. This document is applicable to lithium-rich lithium iron oxide as a lithium supplement additive in cathode materials for lithium-ion batteries. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 5162 Metallic powders - Determination of tap density GB/T 5211.6 General methods of test for pigments and extenders - Part 6: Determination of pH value of an aqueous suspension GB/T 5314 Powders for powder metallurgical purposes - Sampling GB/T 6283 Chemical products - Determination of water - Karl·Fischer method (general method) GB/T 6388 Transport package shipping mark GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values GB/T 19077 Particle size analysis - Laser diffraction methods GB/T 19587 Determination of the specific surface area of solids by gas adsorption using the BET method GB/T 42161 Electrochemical performance test of lithium iron phosphate - Test method for the initial discharge specific capacity and the initial efficiency GB/T 44330 Lithium-ion battery cathode materials - Determination of powder compaction density YS/T 1028.5 Methods for chemical analysis of lithium iron phosphate - Part 5: Determination of calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt, manganese content - Inductively coupled plasma atomic emission spectrometry YS/T 1472.4 Methods for chemical analysis of lithium-rich manganese-based cathode materials - Part 4: Determination of lithium, nickel, cobalt, sodium, potassium, copper, calcium, iron, magnesium, zinc, aluminum, and silicon content - Inductively coupled plasma atomic emission spectrometry JCPDS[ Joint Committee on Powder Diffraction Standards.](75-1253) Standard X-ray diffraction powder patterns - Lithium-rich lithium iron oxide 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 complementary specific capacity of the lithium supplement difference between the initial charge specific capacity and the initial discharge specific capacity under specified conditions 3.2 moisture resistance performance ability to resist erosion in humid environments within a defined time and humidity range Note: Expressed by moisture absorption rate. A lower absorption rate indicates stronger resistance to humid environments, i.e., better moisture resistance performance. 4 Product classification The products are divided into three categories: LFO-Ⅰ, LFO-Ⅱ and LFO-Ⅲ according to the complementary specific capacity of the lithium supplement.

Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Product classification 5 Technical requirements 6 Test methods 7 Inspection rules 8 Marking, packaging, transport, storage and accompanying documents 9 Order contents Annex A (Informative) X-ray diffraction pattern of lithium-rich lithium iron oxide

富鋰鐵酸鋰 1 范圍 本文件規定了富鋰鐵酸鋰的產品分類、技術要求、試驗方法、檢驗規則、標志、包裝、運輸、貯存、隨行文件及訂貨單內容。 本文件適用于鋰離子電池用正極材料補鋰添加劑富鋰鐵酸鋰。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中,注日期的引用文件,僅該日期對應的版本適用于本文件;不注日期的引用文件,其最新版本(包括所有的修改單)適用于本文件。 GB/T 5162 金屬粉末 振實密度的測定 GB/T 5211.6 顏料和體質顏料通用試驗方法 第 6 部分: 水懸浮液pH值的測定 GB/T 5314 粉末冶金用粉末 取樣方法 GB/T 6283 化工產品中水分含量的測定 卡爾·費休法(通用方法) GB/T 6388 運輸包裝收發貨標志 GB/T 8170 數值修約規則與極限數值的表示和判定 GB/T 19077 粒度分布 激光衍射法 GB/T 19587 氣體吸附 BET 法測定固態物質比表面積 GB/T 42161 磷酸鐵鋰電化學性能測試 首次放電比容量及首次充放電效率測試方法 GB/T 44330 鋰離子電池正極材料 粉末壓實密度的測定 YS/T 1028.5 磷酸鐵鋰化學分析方法 第 5 部分:鈣、鎂、鋅、銅、鉛、鉻、鈉、鋁、鎳、鈷、錳量的測定 電感耦合等離子體原子發射光譜法 YS/T 1472.4 富鋰錳基正極材料化學分析方法 第 4部分:鋰、鎳、鈷、鈉、鉀、銅、鈣、鐵、鎂、鋅、鋁、硅含量的測定 電感耦合等離子體原子發射光譜法 JCPDS[ 粉末衍射標準聯合委員會。 ] (75-1253) 富鋰鐵酸鋰 X 射線粉末衍射標準圖譜 3 術語和定義 下列術語和定義適用于本文件。 3.1 補鋰比容量 complementary specific capacity of the lithium supplement 在規定條件下首次充電比容量與首次放電比容量的差值。 3.2 耐濕性moisture resistance performance 在一定時間和濕度范圍內, 抵抗潮濕環境侵蝕的能力。 注: 以吸濕速率表示, 吸濕速率越小, 材料抵抗潮濕環境侵蝕的能力越強, 即耐濕性越好。 4 產品分類 產品根據補鋰比容量分為 LFO-Ⅰ、 LFO-Ⅱ 和 LFO-Ⅲ 三個類別。