標準編號:	GB/T 41006-2021
中文名稱:	汽車用聚氨酯合成革通用技術條件
英文名稱:	General technical requirements for polyurethane synthetic leather used for vehicle
中標分類:	Y47    人造革、合成革
行業分類:	GB    國家標準
ICS分類:	59.080.40 59.080.40    涂覆織物 59.080.40
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2021-12-31
實施日期:	2022-7-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	12000 字
翻譯價格(元):	790.0
交付時間:	付款后 1~3 個工作日

1 Scope This document specifies the general technical requirements, test methods and inspection rules for polyurethane synthetic leather for automobiles. This document applies to polyurethane synthetic leather for automobiles made of cloth base, polyurethane resin and other main raw materials, by wet or dry polyurethane coating and post-processing. 2 Normative references The contents of the following documents constitute the essential provisions of this document through the normative references in the text. Among them, note the date of the reference document, only the corresponding version of the 8 issues apply to this document; not note the 8 issues of the reference document, its latest version (including all the revision of the list) applies to this document. GB/T 250-2008 Colour fastness test for textiles Grey samples for assessing discolouration Card. GB/T2912.1-2009 Determination of formaldehyde in textiles Part 1: Free and hydrolysed formaldehyde (water extraction method) GB/T2918-2018 Standard environment for conditioning and testing of plastic specimens GB8410 Combustion characteristics of automotive interior materials GB/T 16578.1-2008 Determination of the tear resistance of plastic films and sheets Part 1: Pant tear method GB/T 19942-2019 Leather and fur Chemical test Determination of prohibited azo dyes GB/T 38465-2020 Determination of the cold resistance of synthetic leather GB/T 38612-2020 Test methods for artificial leather and synthetic leather Determination of tensile load and elongation at break QB/T 2537-2001 Colour fastness test for leather Reciprocating rubbing colour fastness QB/T 2714-2018 Determination of fastness to fracture in physical and mechanical tests on leather QB/T 2726-2005 Determination of abrasion resistance in physical and mechanical tests on leather QB/T 4043 -2010 Polychlorinated ethylene artificial leather for automobiles QB/T 4671-2014 Test method for synthetic leather Determination of resistance to hydrolysis QB/T 4873 -2015 Synthetic leather test method Laboratory light exposure method QB/T 5068 -2017 Synthetic leather test method for the determination of fogging properties QB/T 5157- -2017 Test method for synthetic leather of artificial leather Determination of colour migration QB/T 5354- 2018 Test method for synthetic leather: Determination of volatile organic compounds. QB/T 5447- -2019 Test method for synthetic leather, determination of odour QC/T 941- 2013 Test method for the determination of mercury in automotive materials QC/T 942- 2013 Test method for hexavalent chromium in automotive materials QC/T 943- 2013 Test methods for lead and cadmium in automotive materials 3 Terminology and definitions There are no terms and definitions in this document that need to be defined. 4 Technical requirements The physical and chemical properties shall conform to the provisions of Table 1. 5 Test methods 5.1 Cutting of specimens A sample of each batch shall be cut along the longitudinal direction to meet all the requirements of the test methods in this chapter. The sample shall be prepared by removing 50 mm of the width at each end of the sample in the transverse direction. 5.2 Conditioning and test environment Unless otherwise specified, the specimen should be GB/T 2918- -2018 in accordance with the provisions of the temperature of 23 C to 2 C, relative humidity of 50% to 10% of the standard environment for state conditioning, the time should not be less than 4h, and in this environment for the test. 5.3 Tensile load and elongation at break The test shall be conducted in accordance with the provisions of method A of GB/T 38612- 2020. 5.4 Tear load Test according to the provisions of GB/T 16578.1- 2008. The test speed is 200 mm/ min and 10 mm/ min, and the test result is the arithmetic mean of the maximum load of three specimens, accurate to 0.1 N. 5.5 Abrasion resistance The test was carried out in accordance with QB/T2726-2005. CS10 grinding wheel, load weight 1000g, equipment friction rotation speed 70r/min, 4000 rpm of friction. At the end of the test, the specimen was removed and the abrasion resistance of the specimen was visually determined according to Table 2. 5.6 Fastness to folding Test according to QB/T2714-2018 in the dry state. 5.7 Hydrolysis resistance Test according to QB/T 4671- 2014, method A, test time 1334 h, after the test according to GB/T 250- 2008 After the test, the fading grade shall be determined according to GB/T 250-2008. 5.8 Cold resistance Test according to the provisions of method A in GB/T38465-2020. 5.9 Chemical media resistance The test shall be carried out in accordance with the provisions of 6.29 of QB/T 4043- 2010. 5.10 Lightfastness The test shall be carried out in accordance with the provisions of test method A in QB/T 4873- 2015, where A2 is selected as the test condition. 5.11 Thermal ageing resistance The test shall be carried out in accordance with the provisions of QB/T 4043- 2010, 6.24. The oven temperature is 100 C to 2 C and the test time is 168 h. After the test, take out the specimen and make the following judgment: Observe the surface changes of the specimen and visually determine the level of discolouration under the standard light source according to GB/T250-2008, with the most serious surface discoloration as the test results. 5.12 Surface colour migration The test shall be conducted in accordance with the provisions of method A of QB/T5157-2017. 5.13 Colour fastness to rubbing Test according to the provisions of QB/T2537-2001. 5.14 Flame resistance Test according to the provisions of GB8410. 5.15 Fogging value Test according to the provisions of method B in QB/T5068-2017. 5.16 Odour Test according to the provisions of condition 4 of Table 1 in QB/T5447-2019. 5.17 Free and hydrolysed formaldehyde Test according to the provisions of GB/T2912.1-2009. 5.18 Decomposable aromatic amine dyes Test according to the provisions of GB/T 19942- 2019. 5.19 Heavy metals 5.19.1 Hexavalent chromium Test according to QC/T942-2013. 5.19.2 Lead Test according to QC/T 943- 2013. 5.19.3 Cadmium Test according to QC/T 943-2013. 5.19.4 Mercury Test according to QC/T941-2013. 5.20 Polybrominated biphenyls and polybrominated diphenyl ethers Test according to QC/T944-2013. 5.21 Volatile organic compounds Test according to the provisions of QB/T5354-2018. 6 Test rules 6.1 Batch quantity Products are accepted in batches. The same - - raw materials. The same - a formula, the same category, the same specification, the same process of continuous production of products for a batch, the number of each batch should not exceed 500 rolls. 6.2 Sampling method One sample shall be taken randomly from each batch. 6.3 Determination Rules If there are unqualified items in the test results, double samples shall be taken from the batch again, and the unqualified items shall be retested, and if still unqualified, the batch shall be unqualified.

1 Scope 2 Normative references 3 Terminology and definitions 4 Technical requirements 5 Test methods 6 Test rules

?1范圍 本文件規定了汽車用聚氨酯合成革的通用技術要求、試驗方法和檢驗規則。 本文件適用于以布基、聚氨酯樹脂等為主要原料,經濕法或干法聚氨酯涂層以及后加工而制成的汽車用聚氨酯合成革。 2規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中,注日期的引用文件,僅該8期對應的版本適用于本文件;不注8期的引用文件,其最新版本(包括所有的修改單)適用于本文件。 GB/T 250- -2008紡織品色牢度試驗 評定變色用灰色樣 卡. GB/T2912.1--2009紡織品甲醛的測定第1部分:游離和水解的甲醛(水萃取法) GB/T2918-2018塑料試樣狀態調節和試驗的標準環境 GB8410汽車內飾材料的燃燒特性 GB/T 16578.1-2008塑料薄膜和薄片 耐 撕裂性能的測定第1部分:褲形撕裂法 GB/T 19942--2019 皮革和皮毛 化學 試驗禁 用偶氮染料的測定 GB/T 38465-2020人造革 合成革試驗方法耐寒 性的測定 GB/T38612-2020人造革合成革試驗方法拉伸負荷及斷裂伸長率的測定 QB/T 2537-2001 皮革色牢度試驗 往復式摩 擦色牢度 QB/T 2714-2018皮革物理 和機械試驗?zāi)?折牢度的測定 QB/T 2726-2005皮革物理 和機械試驗?zāi)?磨性能的測定 QB/T 4043 -2010 汽車用聚氯乙 烯人造革 QB/T 4671-2014人造革合 成革試驗方法耐 水解的測定 QB/T4873-2015人造革合成革試驗方法實驗室光源曝露法 QB/T 5068 -2017人造革合成革試驗方法成霧性的測定 QB/T 5157- -2017人造革合成革試驗方法顏 色遷移性的測定 QB/T 5354- 2018人造革合成革試驗方法揮發性有機化合物的測定. QB/T 5447- -2019人造革合 成革試驗方法氣味 的測定 QC/T 941- 2013汽車材料中汞的檢測方法 QC/T942-2013汽車材料中六價鉻的檢測方法 QC/T 943- 2013 汽車材料中鉛、鎘的檢測方法 3術語和定義 本文件沒有需要界定的術語和定義。 4技術要求 理化性能應符合表1的規定。 5試驗方法 5.1試樣的裁取 每批產品沿縱向裁取作為試驗的樣品,數量應滿足本章中全部試驗方法的要求。在樣品橫向兩端各除去寬50mm后制備試樣。 5.2試樣狀態調節和試驗環境 除另有規定外,試樣應按GB/T 2918- -2018 的規定,在溫度23 C士2 C、相對濕度50%士10%的標準環境下進行狀態調節,時間不應少于4h,并在此環境下進行試驗。 5.3拉伸負荷及斷裂伸長率 按GB/T 38612- 2020 中A法的規定進行試驗。 5.4撕裂負荷 按GB/T 16578.1- 2008 的規定進行試驗。試驗速度200 mm/ min士10 mm/ min,試驗結果取3個試樣最大負荷的算術平均值,精確至0.1 N。 5.5 耐磨性 按QB/T2726-2005的規定進行試驗。采用CS10磨輪,負荷重量1000g,設備摩擦旋轉速度 70r/min,摩擦轉數4000轉。試驗結束后取下試樣,查看試樣表面的靡損程度根據表2規定目視判定試樣的耐磨性等級。 5.6 耐折牢度 按QB/T2714-2018中干態的規定進行試驗。 5.7耐水解性 按QB/T 4671- 2014 中A法的規定進行試驗,試驗時間1334 h,試驗后按GB/T 250- 2008 的規 定判定變褪色等級。 5.8耐寒性 按GB/T38465-2020中A法的規定進行試驗。 5.9耐化學介 質性能 按QB/T 4043- 2010 中6.29的規定進行。 5.10耐光性 按QB/T 4873- 2015 中試驗方法A的規定進行試驗,其中試驗條件選擇A2。 5.11耐 熱老化性能 按QB/T 4043- 2010中 6.24的規定進行。烘箱溫度為100 C士2 C ,試驗時間:168 h。試驗結束后,取出試樣,作以下判定: 觀察試樣表面變化,按GB/T250-2008的規定,在標準光源下目測判定變褪色等級，以最嚴重的 表面變色作為試驗結果。 5.12表面顏色遷移性 按QB/T5157-2017中A法的規定進行試驗。 5.13耐摩擦色牢 度 按QB/T2537-2001的規定進行試驗。 5.14阻 燃性 按GB8410的規定進行試驗。 5.15霧化值 按QB/T5068-2017中B法的規定進行試驗。 5.16氣味 按QB/T5447-2019中表1的條件4的規定進行試驗。 5.17游離和水解的甲醛 按GB/T2912.1-2009的規定進行試驗。 5.18可分解芳香胺染料 按GB/T 19942- 2019 的規定進行試驗。 5.19 重金屬 5.19.1六價鉻 按QC/T942-2013的規定進行試驗。 5.19.2鉛 按QC/T 943- 2013 的規定進行試驗。 5.19.3鎘 按QC/T943-2013的規定進行試驗。 5.19.4汞 按QC/T941-2013的規定進行試驗。 5.20多 溴聯苯和多溴二苯醚 按QC/T944-2013的規定進行試驗。 5.21揮發 性有機化合物 按QB/T5354-2018的規定進行試驗。 6檢驗規則 6.1 批量 產品以批為單位進行驗收.同- - 原料.同-一配方、同一類別、同一規格、同一工藝連續生產的產品為一批,每批數量應不超過500卷。 6.2 抽樣方法 從每批產品中隨機抽取1個樣品。 6.3判定 規則 檢驗結果中若有不合格項,應再?gòu)脑撆谐槿‰p倍樣品,對不合格項進行復檢,若仍不合格，則該批為不合格。