標準編號:	GB/T 3917.4-2009
中文名稱:	紡織品 織物撕破性能 第4部分：舌形試樣（雙縫）撕破強力的測定
英文名稱:	Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
中標分類:	W04    基礎標準與通用方法
行業分類:	GB    國家標準
ICS分類:	59.080.30 59.080.30    紡織物 59.080.30
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2009-3-19
實施日期:	2010-1-1
標準狀態:	superseded
被新標準替代:	GB/T 3917.2-1997 紡織品 織物撕破性能 第2部分:舌形試樣撕破強力的測定
被替代日期:	1997-12-1
替代舊標準:	GB/T 3917.2-1997 紡織品 織物撕破性能 第2部分:舌形試樣撕破強力的測定
翻譯語言:	英文
文件格式:	PDF
中文字符數:	13000 字
翻譯價格(元):	560.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 3917 describes a double-tear method known as the tongue test, using a test specimen with cuts shaped to form a tongue. The tear force measured is the force required to propagate the previously started double tears when the force is applied parallel to the cuts and the fabric tears in the direction of the applied force. The test is mainly applicable to woven textile fabrics. It may be applicable to fabrics produced by other techniques, e.g. to some nonwovens. In general the method is not applicable to knitted fabrics and woven elastic fabrics. The method only allows the use of constant-rate-of-extension (CRE) testing machines. 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this part of GB/T 3917. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, the parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 6529 Textiles — Standard atmospheres for conditioning and testing (GB/T 6529-2008, ISO 139:2005, MOD) GB/T 16825.1 Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system (GB/T 16825.1-2008, ISO 7500-1: 2004, IDT) GB/T 19022 Measurement management systems — Requirements for measurement processes and measuring equipment (GB/T 19022-2003, ISO 10012: 2003, IDT) 3 Terms and Definitions For the purposes of this part of GB/T 3917, the following terms and definitions apply. 3.1 Constant-rate-of-extension (CRE) testing machine Tensile-testing machine where one clamp is stationary whilst the other is moving with a constant speed throughout the test.

Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Principle 5 Sampling 6 Apparatus 7 Atmosphere for Conditioning and Testing 8 Preparation of Test Specimens 9 Procedure 10 Calculation and Expression of Results 11 Test Report Appendix A (informative) Suggested Procedure for Sampling Appendix B (informative) Example of Pattern for Cutting out Test Specimens From the Laboratory Sample Appendix C (informative) Sample Calculation of Tear Force