GB/T 37267-2018 General specification of seismic bracing for building
1 Scope
This standard specifies the general requirements, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of the seismic bracing for buildings.
This standard is applicable to the design, manufacturing, and inspection of seismic bracings for systems such as the building water supply and drainage systems, heating, ventilation, and air conditioning systems, electrical systems, gas systems, and fire protection systems in areas with seismic fortification intensity of 6 to 9 degrees.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 93 Single coil spring lock washers - Normal type
GB/T 95 Plain washers - Product grade C
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 700 Carbon structural steels
GB/T 1804-2000 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3091 Welded steel pipes for low pressure liquid delivery
GB/T 3098.1 Mechanical properties of fasteners - Bolts, screws and studs
GB/T 3098.2 Mechanical properties of fasteners - Nuts
GB/T 3098.6 Mechanical properties of fasteners - Stainless steel bolts, screws and studs
GB/T 3098.15 Mechanical properties of fasteners - Stainless steel nuts
GB/T 4956 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
GB/T 6723 Cold forming open section steel for general structure
GB/T 9944 Stainless steel wire ropes
GB/T 9978.1 Fire-resistance tests - Elements of building construction - Part 1: General requirements
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 16583 Identification of saturated rubbers in unsaturated rubbers
GB/T 20878 Stainless and heat-resisting steels - Designation and chemical composition
GB 50981 Code for seismic design of mechanical and electrical equipment
JG/T 160 Mechanical anchors for use in concrete
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
seismic bracing
seismic support facility firmly connected to the building structure, consisting of the fixing part, reinforced suspender, structure connecting component, and bracing component
3.2
lateral seismic bracing
seismic bracing with a bracing component parallel to the pipe cross-section
3.3
longitudinal seismic bracing
seismic bracing with a bracing component perpendicular to the pipe cross-section
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
Annex A (Informative) Structural types of seismic bracings
Annex B (Informative) Structural types of structure connecting components
Annex C (Informative) Structural types of pipe connecting components
