1 Scope
This Standard specifies the classification, requirements for complete vehicle, requirements for special equipment and facilities, reliability requirements, test methods and inspection rules of caravans.
This Standard applies to the caravans towed by the motor vehicle equipped with special towing device; the camping trailers served as permanent residence may use this standard as a reference.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 1589 Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles
GB/T 2820.5 Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
GB/T 3324 General technical requirements for wooden furniture
GB/T 3325 General technical requirements for metal furniture
GB/T 3730.1 Motor vehicles and trailers – Types - Terms and definitions
GB/T 4606 Road vehicles-50 semi-trailer fifth wheel coupling pin-Basic and mounting / interchangeability dimensions
GB 4785 Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers
GB/T 5053.1-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
GB/T 5053.2-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
GB 5842 Liquefied petroleum gas cylinders
GB 7258 Technical specifications for safety of power-driven vehicles operating on roads
GB 9685 National Food Safety Standard for Uses of Additives in Food Contact Materials and Their Products
GB/T 11918.2 Plug, socket-outlets and couplers for industrial purposes - Part 2: Dimensional compatibility and interchangeability requirements for pin and contact-tube accessories
