1 Scope
This standard specifies the requirements for dimension, shape, technical requirement, test method, acceptance rule, packaging, marking and quality certificate of hot-rolled carbon and low alloy structural steel strip.
This standard is applicable to hot-rolled carbon and low alloy structural steel strip with thickness not more than 12.00mm and width within 50~600mm.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 222-1984 Method of Sampling Steel for Determination of Chemical Composition and Permissible Variations for Product Analysis
GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature (GB/T 228-2002, eqv ISO 6892:1998)
GB/T 232 Metallic Materials - Bend Test (GB/T 232-1999, eqv ISO 7438: 1985)
GB/T 247 General Rule of Acceptance, Package, Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 700 Carbon Structural Steels
GB/T 1591 High Strength Low Alloy Structural Steels
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for Mechanical Testing (GB/T 2975-1998, eqv ISO 377:1997)
GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low-alloy Steel (Routine Method)
Foreword I
1 Scope
2 Normative References
3 Classification and Designation
4 Dimension, Shape, Weight and Permissible Tolerance
5 Technical Condition
6 Test Method
7 Acceptance Rule
8 Packaging, Marking and Quality Certificate
