標準編號:	GB/T 33383-2024
中文名稱:	改性聚氯乙烯結構膠及膠泥腐蝕控制技術
英文名稱:	Corrosion control technology of modified polyvinyl chloride structural adhesive and cement
中標分類:	A29    材料防護
行業分類:	GB    國家標準
ICS分類:	25.220.99 25.220.99    其他處理和涂覆 25.220.99
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2024-3-15
實施日期:	2024-10-1
標準狀態:	valid
替代舊標準:	GB/T 33383-2016 耐蝕改性聚氯乙烯（HFVC）結構膠及膠泥防腐技術規范
翻譯語言:	英文
文件格式:	PDF
中文字符數:	17000 字
翻譯價格(元):	1190.0
交付時間:	付款后 1~3 個工作日

GB/T 33383-2024 Corrosion control technology of modified polyvinyl chloride structural adhesive and cement 1 Scope This document specifies the requirements and data management for corrosion control technology of modified polyvinyl chloride structural adhesive and cement. This document is applicable to the waterproof, impermeable and anti-corrosion design and construction of reinforced concrete (or concrete) surfaces in new, rebuilt and expanded buildings and structures. The anti-corrosion design and anti-corrosion operation of other equipment and steel structure surfaces may use this document for reference. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 531 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Duromerer method (Shore hardness) GB/T 1725 Paints varnishes and plastics - Determination of non-volatile-matter content GB/T 1728 Methods of test for drying time of coatings of paints and putties GB/T 1732 Determination of impact resistance of film GB/T 2567 Test methods for properties of resin casting body GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling GB/T 7124 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies GB/T 9274 Paints and varnishes - Determination of resistance to liquids GB/T 13452.2-2008 Paints and varnishes - Determination of film thickness GB/T 16777-2008 Test methods for building waterproofing coatings GB/T 17671 Test method of cement mortar strength (ISO method) GB/T 31838.2-2019 Solid insulating materials - Dielectric and resistive properties - Part 2: Resistive properties (DC methods) - Volume resistance and volume resistivity GB 50108-2008 Technical code for waterproofing of underground works GB 50209 Code for acceptance of construction quality of building ground GB 50212 Code for construction of building anticorrosive engineering GB 50224 Standard for acceptance of construction quality of anticorrosive engineering of buildings JC/T 474-2008 Water-repellent admixture for mortar and concrete 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 modified polyvinyl chloride (HFVC) anticorrosive structural adhesive material composed of modified polyvinyl chloride resin, corrosion-resistant pigment, filler component mixed with polyvinyl chloride compound and auxiliary component 3.2 emmy microcrystalline (AWHFVC) anticorrosive structural adhesive material composed of corrosion-resistant modified polyvinyl chloride resin, corrosion-resistant pigment, filler component, emmy biomaterials mixed with polyvinyl chloride compound and auxiliary component, etc. Note: Emmy biomaterials are liquid materials processed by emmy technology using biological substrates as raw materials. 3.3 base surface surface of reinforced concrete (or concrete) layer 3.4 priming coating coating of waterproof, impermeable and anticorrosive sol and HFVC concentrator is pre-coated on the base surface before operation Note: HFVC concentrator is a kind of gray powder which is processed by special process with a variety of special active chemical substances as raw materials. 3.5 priming structural coating coating in which HFVC (or AWHFVC) anticorrosive structural adhesive or mastic is applied to the priming coating 3.6 reinforcing coating HFVC (or AWHFVC) anticorrosive structural adhesive coating applied over a large area of the priming structural coating 3.7 top coating HFVC (or AWHFVC) anticorrosive structural adhesive coating applied on the reinforcing coating and in contact with the medium 3.8 repairing material for coating HFVC (or AWHFVC) anticorrosive structural adhesive, admixture (mortar) and plugging agent for repairing the quality defects of various coatings and concrete top coating Note: Admixture (mortar) and plugging agent can only be used on concrete base surface. 3.9 waterproof, impermeable and anticorrosive sol sol processed by special process and with natural inorganic minerals, emmy biomaterials, a variety of special active chemicals as raw materials 3.10 anticorrosive structural adhesive two-component (or three-component) curing reactive anticorrosive priming coating and top coating composed of a variety of modified resins, synthetic resins and some nanomaterials (or emmy biomaterials), anticorrosive pigment fillers, auxiliaries and curing agents 3.11 anticorrosive composite coating coating composed of priming coating, waterproof, impermeable and anticorrosive sol, priming structural coating, reinforcing coating and top coating 4 Technical requirements 4.1 Design 4.1.1 Considerations in the construction design of anticorrosive engineering: — The site, medium and pressure of anticorrosive engineering; — Properties and applications of coatings, repairing material for coating and waterproof, impermeable and anticorrosive sol used; — Anticorrosive measures for local structures; — Maintenance before and after each coating operation. 4.1.2 During the construction and design of anticorrosive engineering, the performance requirements of priming structural coating, top coating and priming coating of HFVC (or AWHFVC) anticorrosive composite coating shall meet the requirements of Table 1 and Table 2 respectively.

Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Technical requirements 4.1 Design 4.2 Materials 4.3 Construction 4.4 Acceptance 5 Data management Annex A (Normative) Test method for performance of undercoat coatings

改性聚氯乙烯結構膠及膠泥腐蝕控制技術 1 范圍 本文件規定了改性聚氯乙烯結構膠及膠泥腐蝕控制的技術要求和資料管理。 本文件適用于新建、改建、擴建的建筑物和構筑物中鋼筋混凝土(或混凝土)表面的防水抗?jié)B防腐蝕設計及施工作業，其他設備及鋼結構表面的防腐蝕設計及耐蝕作業參照使用。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 531. 1 硫化橡膠或熱塑性橡膠 壓入硬度試驗方法 第1部分：邵氏硬度計法(邵爾硬度) GB/T 1725 色漆、清漆和塑料 不揮發物含量的測定 GB/T1728 漆膜、膩?zhàn)幽じ稍飼r(shí)間測定法 GB/T 1732 漆膜耐沖擊測定法 GB/T 2567 樹脂澆鑄體性能試驗方法 GB/T3186 色漆、清漆和色漆與清漆用原材料 取樣 GB/T7124 膠粘劑 拉伸剪切強度的測定(剛性材料對剛性材料) GB/T 9274 色漆和清漆 耐液體介質的測定 GB/T 13452. 2-2008 色漆和清漆 漆膜厚度的測定 GB/T16777-2008 建筑防水涂料試驗方法 GB/T17671 水泥膠砂強度檢驗方法(ISO法) GB/T31838. 2-2019 固體絕緣材料 介電和電阻特性 第2部分：電阻特性(DC方法)體積電阻和體積電阻率 GB 50108-2008 地下工程防水技術規范 GB 50209 建筑地面工程施工質量驗收規范 GB 50212 建筑防腐蝕工程施工規范 GB 50224-2018 建筑防腐蝕工程施工質量驗收標準 JC/T 474-2008 砂漿、混凝土防水劑 3 術語和定義 下列術語和定義適用于本文件。 3.1 改性聚氯乙烯(HFVC) 防腐結構膠 modified polyvinyl chloride (HFVC) anticorrosive structural adhesive 由改性聚氯乙烯樹脂、耐蝕顏料、填料組分與聚氯乙烯化合物、助劑組分混合而成的材料。 3.2 埃米微晶(AWHFVC) 防腐結構膠 emmy microcrystalline (AWHFVC) anticorrosive structural adhesive 由耐蝕改性聚氯乙烯樹脂、耐蝕顏料、填料組分、埃米生物材料與聚氯乙烯化合物、助劑組分等混合而成的材料。 注：埃米生物材料是以生物基材為原料，通過埃米技術加工而成的液體材料。 3.3 基體表面 base surface 鋼筋混凝土(或混凝土) 層表面。 3. 4 底涂層 priming coating 作業前將防水抗?jié)B防腐溶膠、HFVC濃縮劑預先涂覆在基體表面的涂層。 注：HFVC濃縮劑是以多種特殊的活性化學物質為原料，通過特殊工藝加工而成的灰色粉料。 3.5 主層 priming structural coating 將HFVC(或AWHFVC)防腐結構膠或膠泥涂覆在底涂層上的涂層。 3.6 加強層 reinforcing coating 大面積涂覆在主層上的HFVC(或AWHFVC)防腐結構膠涂層。 3.7 面涂層 top coating 涂覆在加強層上并與介質接觸的HFVC(或AWHFVC)防腐結構膠涂層。 3.8 涂層修補材料 repairing material for coating 用于修補各涂層、混凝土面層質量缺陷的HFVC(或AWHFVC)防腐結構膠、摻合劑(砂漿)和堵漏劑。 注：摻合劑(砂漿)和堵漏劑只能用于混凝土基面。 3.9 防水抗?jié)B防腐溶膠 waterproof, impermeable and anticorrosive sol 以天然無機礦物質、埃米生物材料、多種特殊的活性化學物質為原料，通過特殊工藝加工而成的膠料。 3.10 防腐結構膠 anticorrosive structural adhesive 由多種改性樹脂、合成樹脂與部分納米材料(或埃米生物材料)、耐腐蝕顏填料、助劑以及固化劑等組成的雙組分(或三組分)固化反應型防腐蝕底涂層、面涂層涂料。 3.11 防腐復合涂層 anticorrosive composite coating 由底涂層、防水抗?jié)B防腐溶膠、主層、加強層、面涂層組合的涂層。 4 技術要求 4.1 設計 4.1.1 防腐蝕工程施工設計時考慮： ——工程防腐的部位、介質、承受的壓力等； ——使用的涂料、涂層修補材料及防水抗?jié)B防腐溶膠的性能及應用； ——局部構造的防腐措施； ——各涂層作業前、后的養護。 4.1.2 防腐工程施工設計時，HFVC(或AWHFVC)防腐復合涂層的主層涂料和面涂層涂料、底涂層涂料的性能要求應分別符合表1、表2的規定。