Rules of package, mark, transport and reserve for domestic ceramic ware
1 Scope
This standard specifies the rules for package, mark, transport and reserve for domestic ceramic ware products.
This standard is applicable to the package, mark, transport and reserve for domestic ceramic ware products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191 Packaging—Pictorial marking for handling of goods
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1: 1999, IDT)
GB/T 2934 General-purpose flat pallets for through transit of goods—Principal dimensions and tolerances
GB/T 4122.1-2008 Packaging terms—Part 1: Basic
GB/T 4857.3 Packaging—Basic tests for transport packages—Part 3: Stacking test methods using a static load
GB/T 4857.5 Packaging—Transport packages—Vertical impact test method by dropping
GB/T 4892 Dimensions of rigid rectangular transport packages
GB/T 6543 Single and double corrugated boxes for transport packages
GB/T 9174 General specification for transport packages of general cargo
GB/T 12339 Inner packaging materials in preservation
GB/T 12464 Wooden boxes
GB/T 15233 Packaging—Unit load size
GB/T 16470 Palletized unit loads
GB/T 17306 Standards for packaging—Consumer requirements
?
GB/T 18127 Numbering and symbol marking of logistic units
GB/T 18131 Standard shipping marks for international trade
GB 18455 Package recycling marking
GB/T 19142 Packaging for export commodity—General rule
GB/T 19451 Designing procedure of transport packages
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GB/T 4122.1-2008 apply.
4 Package
4.1 Package design
4.1.1 The package shall be designed in a scientific and reasonable, practical and convenient, beautiful and marketable way, and shall be conducive to recycling and reuse in view to the needs of different transportation and sales methods, and excessive packaging is not allowed.
4.1.2 The package shall be designed according to requirements of GB/T 19451 and GB/T 17306 and based on the needs of consumers for environmental safety, economy and applicability.
4.1.3 The main body of the package shall be upright, and the main body and accessories shall be complete, firm and consistent with each other.
4.1.4 The weight of each carton package shall not exceed 40 kg.
4.1.5 The package bar code shall meet the requirements of GB/T 18127.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Package
5 Marks
6 Transport and reserve
