標準編號:	GB/T 307.4-2002
中文名稱:	滾動軸承 推力軸承 公差
英文名稱:	Rolling bearings - Thrust bearings - Tolerances
行業分類:	GB    國家標準
發布機構:	國家質量監督檢驗檢疫總局
發布日期:	2002-10-11
實施日期:	2003-5-1
標準狀態:	superseded
被新標準替代:	GB/T 307.4-2012 滾動軸承 公差 第4部分：推力軸承公差
被替代日期:	2013-3-1
替代舊標準:	GB/T 307.4-1994 滾動軸承 推力球軸承 公差
翻譯語言:	英文
文件格式:	PDF
中文字符數:	5000 字
翻譯價格(元):	350.0
交付時間:	付款后 1 個工作日

1 Scope This Part of GB/T 307 specifies tolerances for boundary dimensions (except chamfer dimensions) and for running accuracy of thrust rolling bearings with flat back faces specified in GB/T 273.2-1998. This Part does not apply to certain thrust bearings, e.g. needle roller bearings, or for particular fields of application, e.g. special precision bearings. Chamfer dimension limits are given in GB/T 274-2000. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 307. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.