GB/T 29713-2013 Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels
1 Scope
This standard specifies the models, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of stainless steel wire electrodes, strip electrodes and rods.
This standard is applicable to stainless steel wire electrodes, strip electrodes and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, electroslag welding and laser beam welding.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 1954 Methods of measurement for ferrite content in austenitic Cr-Ni stainless steel weld metals (GB/T 1954-2008, ISO 8249: 2000, MOD)
GB/T 2652 Tensile test methods on weld and deposited metal (GB/T 2652-2008, ISO 5178: 2001, IDT)
GB/T 3375 Welding terminology
GB/T 4334 Corrosion of metals and alloys - Test methods for intergranular corrosion of stainless steels (GB/T 4334-2008, ISO 3651-1: 1998, ISO 3651-2: 1998, MOD)
GB/T 25775 Technical delivery conditions for welding consumables - Type of product dimensions tolerances and markings (GB/T 25775-2010, ISO 544: 2003, MOD)
GB/T 25778 Procurement guidelines for welding consumables (GB/T 25778-2010, ISO 14344: 2010, MOD)
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GB/T 3375 and the following apply.
3.1
rod; wire
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Models
5 Technical requirements
6 Test methods
7 Inspection rules
8 Packaging, marking and quality certificate
Annex A (Informative) Tensile properties of deposited metals
