標準編號:	GB/T 2951.42-2008
中文名稱:	電纜和光纜絕緣和護套材料通用試驗方法 第42部分：聚乙烯和聚丙烯混合料專用試驗方法 高溫處理后抗張強度和斷裂伸長率試驗 高溫處理后卷繞試驗 空氣熱老化后的卷繞試驗 測定質量的增加 長期熱穩定性試驗 銅
英文名稱:	Common test methods for insulating and sheathing materials of electric and optical cables - Part 42: Methods specific to polyethylene and polypropylene compounds - Tensile strength a
中標分類:	K13    電纜及其附件
行業分類:	GB    國家標準
ICS分類:	29.060 29.060    電線和電纜 29.060
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2008-6-26
實施日期:	2009-4-1
標準狀態:	valid
替代舊標準:	GB/T 2951.9-1997 電纜絕緣和護套材料通用試驗方法 第4部分:聚乙烯和聚丙烯混合料專用試驗方法 第2節:預處理后斷裂伸長率試驗--預處理后卷繞試驗--空氣熱老化后的卷繞試驗--測定質量的增加 附錄A:長期熱穩定性試驗 附錄B:銅催化氧化降解試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	12000 字
翻譯價格(元):	720.0
交付時間:	付款后 1 個工作日

1 General 1.1 Scope This part of GB/T 2951 specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical fibre cables for power distribution and telecommunications, including cables used on ships and in offshore applications. These test methods apply specifically to polyolefin insulation and sheath. 1.2 Normative References The following normative document contains provisions which, through reference in this text, constitute provisions of this part of GB/T 2951. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. ? GB/T 2951.11-2008 Common Test Methods for Insulating and Sheathing Materials of Electric Cables and Optical Cables — Part 11: Methods for General Application — Measurement of Thickness and Overall Dimensions — Tests for Determining the Mechanical Properties (IEC 60811-1-1:1993, IDT) GB/T 2951.13-2008 Common Test Methods for Insulating and Sheathing Materials of Electric Cables and Optical Cables — Part 13: Measurement for Determining the Density — Water Absorption Tests — Shrinkage Test (IEC 60811-1-3:1993, IDT) ISO 188 Rubber, Vulcanized or Thermoplastic — Accelerated Ageing and Heat-resistance Tests

Foreword II 1 General 1.1 Scope 1.2 Normative References 2 Terms and Definitions 3 Test Values 4 Applicability 5 Type Tests and Other Tests 6 Pre-conditioning 7 Median Value 8 Tensile Strength and Elongation at Break After Conditioning at Elevated Temperature 8.1 General 8.2 Conditioning Procedure 8.3 Tensile Strength and Elongation Tests After Conditioning at Elevated Temperature 8.4 Expression of Results 9 Wrapping Test After Conditioning at Elevated Temperature 9.1 General 9.2 Conditioning Procedure 9.3 Test Procedure 9.4 Evaluation of Results 10 Wrapping Test After Thermal Ageing in Air 10.1 General 10.2 Apparatus 10.3 Sampling 10.4 Ageing Procedure 10.5 Test Procedure 10.6 Evaluation of Results 11 Mass Increase of Insulation 11.1 General 11.2 Sampling 11.3 Test Procedure 11.4 Calculation Annex A (Normative) Long-term Stability Test Annex B (Normative) Test Method for Copper-catalyzed Oxidative Degradation of Polyolefin Insulated Conductors [Oxidation Induction Time (OIT) Test]