標準編號:	GB/T 2828.10-2010
中文名稱:	計數抽樣檢驗程序 第10部分：GB/T 2828計數抽樣檢驗系列標準導則
英文名稱:	Sampling procedures for inspection by attributes―Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
中標分類:	A41    數學
行業分類:	GB    國家標準
ICS分類:	03.120.30 03.120.30    統計方法的應用 03.120.30
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2010-09-02
實施日期:	2011-4-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	15000 字
翻譯價格(元):	900.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 2828 provides a general introduction to acceptance sampling by attributes and provides a brief summary of the attribute sampling schemes and plans used in GB/T 2828.1, GB/T 2828.2, GB/T 2828.3, GB/T 2828.4, GB/T 2828.5 and GB/T 2828.11. It also provides guidance on the selection of the appropriate inspection system for use in a particular situation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies. GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT) GB/T 2828.2-2008 Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:1985, MOD) GB/T 2828.3-2008 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005, IDT) GB/T 2828.4-2008 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels (ISO 2859-4:2002, MOD) GB/T 2828.5 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL)for lot-by-lot inspection (ISO 2859-5;2005, IDT) GB/T 2828.11-2008 Sampling procedures for inspection by attributes - Part 11: Procedures for assessment of declared quality levels for small population GB/T 3358.1-2009 Statistics - Vocabulary and symbols - Part 1:General statistical terms and terms used in probability (ISO 3534-1:2006, IDT) GB/T 3358.2-2009 Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-1:2006, IDT) 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 2828.1, GB/T 2828.2, GB/T 2828.3, GB/T 2828.4, GB/T 2828.5, GB/T 3358.1 and GB/T 3358.2 apply. 4 General introduction to acceptance inspection 4.1 Aim of sampling inspection The principal purpose of acceptance sampling inspection is to see that the producer submits lots of a quality that is at, or better than, a mutually agreed level. All GB/T 2828 series standards are based on a common parameter, e.g. AQL, LQ or DQL. The producer may use these sampling procedures to ensure that the quality level will be acceptable to the consumer. In all these procedures, it must be recognized that the financial resources are not unlimited. The cost of the item should reflect the cost of inspection as well as the cost of production.

Foreword i Introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 General introduction to acceptance inspection 4.1 Aim of sampling inspection 4.2 Acceptance sampling 4.3 Other inspection practices 4.4 Concepts of AQL, LQ and DQL 5 The GB/T 2828 series 5.1 GB/T 2828.1, Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 5.2 GB/T 2828.2, Sampling plans indexed by limiting quality (LQ) for isolated lot inspection 5.3 GB/T 2828.3, Skip-lot sampling procedures 5.4 GB/T 2828.4 and GB/T 2828.11, Procedures for assessment of declared quality levels 5.5 GB/T 2828.5, System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection 5.6 GB/T 2828.11, Procedures for assessment of declared quality levels Bibliography