標準編號:	GB/T 273.1-2011
中文名稱:	滾動軸承 外形尺寸總方案 第1部分:圓錐滾子軸承
英文名稱:	Rolling bearings - Boundary dimensions general plan - Part 1: Tapered roller bearings
中標分類:	J11    滾動軸承
行業分類:	GB    國家標準
ICS分類:	21.100.20 21.100.20    滾動軸承 21.100.20
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2011-11-21
實施日期:	2012-6-1
標準狀態:	superseded
被新標準替代:	GB/T 273.1-2023 滾動軸承 外形尺寸總方案 第1部分：圓錐滾子軸承
被替代日期:	2023-12-1
替代舊標準:	GB/T 4648-1996 滾動軸承 圓錐滾子軸承 凸緣外圈 外形尺寸
翻譯語言:	英文
文件格式:	PDF
中文字符數:	18000 字
翻譯價格(元):	1260.0
交付時間:	付款后 1 個工作日

1 Scope This Part of GB 273 specifies bearing and subunit boundary dimensions for complete single-row and double-row tapered roller bearings. It also specifies the flange dimensions of flanged outer rings for a selection of these bearings. A series designation for each bearing is also specified. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 274-2000 Rolling Bearings — Chamfer Dimensions — Maximum Values (idt ISO 582:1995) GB/T 307.1-2005 Rolling Bearings — Radial Bearings — Tolerances (ISO 492:2002, MOD) GB/T 6930-2002 Rolling Bearings — Vocabulary (ISO 5593:1997, IDT) GB/T 7811-2007 Rolling Bearings — Symbols for Quantities (ISO 15241:2001, IDT) ISO 1132-1:2000 Rolling Bearings — Tolerances — Part 1: Terms and definitions 3 Terms and Definitions

Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Symbols 5 Series Designations 6 Boundary Dimensions Appendix A