標準編號:	GB/T 25821-2023
中文名稱:	不銹鋼鋼絞線
英文名稱:	Stainless steel wire strand
中標分類:	H49    鋼絲、鋼絲繩
行業分類:	GB    國家標準
ICS分類:	77.140.65 77.140.65    鋼絲、鋼絲繩和環節鏈 77.140.65
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2023-08-06
實施日期:	2024-3-1
標準狀態:	valid
替代舊標準:	GB/T 25821-2010 不銹鋼鋼絞線
翻譯語言:	英文
文件格式:	PDF
中文字符數:	16000 字
翻譯價格(元):	1120.0
交付時間:	付款后 1~3 個工作日

Stainless steel wire strand 1 Scope This document specifies the classification and labeling, ordering contents, dimensions, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of stainless steel wire strands (hereinafter referred to as steel wire strands). This document is applicable to stainless steel wire strands mainly used for building structure and building decoration, which are composed of several round cross section stainless steel wires (hereinafter referred to as "steel wires"). It may be used as reference for stainless steel wire strands for other purposes. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2104 Steel wire ropes - Packing, marking and certificate - General requirements GB/T 4240 Stainless steel wires GB/T 8358 Steel wire ropes - Determination of measured breaking force GB/T 8706 Steel wire ropes - Vocabulary, designation and classification GB/T 24191 Steel wire ropes - Determination of the actual modulus of elasticity 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 8706 and GB/T 24191 and the following apply. 3.1 stainless steel wire strand steel wire strand made by spirally twisting a certain number of round stainless steel wires in one or more layer(s) 3.2 nominal cross section area of steel wire strand sum of cross sectional areas of steel wires calculated based on the nominal diameter of steel wires in steel wire strands 4 Classification and labeling 4.1 The section structure of steel wire strands is as shown in Table 1. Any other structure, if required, shall be determined by negotiation between the supplier and the purchaser.

Contents Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and labeling 5 Order contents 6 Dimension 7 Technical requirements 8 Test methods 9 Inspection rules 10 Packaging, marking and quality certificate Annex A (Informative) Calculation method of minimum breaking force of stainless steel wire strand

不銹鋼鋼絞線 1范圍 本文件規定了不銹鋼鋼絞線(以下簡稱“鋼絞線")的分類和標記、訂貨內容、尺寸、技術要求、試驗方法、檢驗規則、包裝、標志和質量證明書。 本文件適用于由多根圓形截面不銹鋼絲(以下簡稱“鋼絲”)組成的主要用于建筑結構及建筑裝飾用不銹鋼鋼絞線,其他用途的不銹鋼鋼絞線可參考使用。 2規范性引用文件. 下列文件中的內容通過文中的規范性引用面構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件；不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。 GB/T 2104 鋼絲繩包裝、標志及質量證明書的--般規定 GB/T 4240 不銹鋼絲 GB/T 8358 鋼絲繩 實際破斷拉力測定方法 GB/T 8706 鋼絲繩 術語、標記和分類 GB/T 24191 鋼絲繩 實際彈性模量測定方法 3術語和定義 GB/T 8706、GB/T 24191界定的以及下列術語和定義適用于本文件。 3.1 不銹鋼鋼絞線stainless steel wire strand 由一定數量,一層或多層的圓形不銹鋼絲螺旋絞合而成的鋼絞線。 3.2 鋼絞線公稱截面積nominal cross section area of steel wire strand 根據鋼絞線中鋼絲公稱直徑計算得到的鋼絲橫截面積之和。 4分類和標記 4.1鋼絞線其斷面結構形式見表1。如需其他結構,可由供需雙方協商確定。