1 Scope
This standard specifies the order contents, dimension, shape, weight, permissible deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of hot-rolled wire rods for prestressing steel bars of concrete.
This standard is applicable to the manufacture of hot-rolled wire rods for prestressing steel bars of concrete.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method (GB/T 223.11-2008, ISO 4937: 1986, MOD)
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.19 Methods for chemical analysis of iron steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method (GB/T 223.23-2008, ISO 4939: 1984, MOD)
GB/T 223.53 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrophotometric method for the determination of copper content
Foreword i
1 Scope
2 Normative references
3 Order contents
4 Dimension, shape, weight and permissible deviation
5 Technical requirements
6 Test methods
7 Inspection rules
8 Packaging, marking and quality certificate
