Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard refers to the American Society for Testing and Materials ASTM D 3785—2002 "Standard Performance Specification for Necktie and Scarf Woven Fabrics".
The Appendix A in this standard is normative.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of National Technical Committee 219 on Garments of Standardization Administration of China (SAC /TC 219).
The National Technical Committee 219 on Garments of Standardization Administration of China is responsible for the explanation of this Standard.
Chief Drafting Organizations of this standard: Shanghai Garment Research Institute, Shengzhou Products Quality Supervision and Inspection Institute, China National Garment Association (CNGA) Apparels Professional Committee, Zhengjiang Babei Necktie & Weaving Co., Ltd., Zhejiang Haoyunlai Digital Textile Co., Ltd., Zhejiang Yashilin Necktie and Clothes Co., Ltd., Zhejiang Jiajia Necktie and Garment Co., Ltd., Zhejing Maidilang Group Co., Ltd., Zhejiang Jiayou Necktie Co.,Ltd., Ningbo Ailite Apparal Co., Ltd..
Chief drafting staffs of this standard: Zhou Xiedong, Yu Haoyan, Xu Jian, Qiang Fei, Jin Yao, Hu Shiliang, Fan MaoLin, Wei Xiaohua, Yuan Xiaobing, Xing Chenglin and Wei Junqian.
Contents
1 Scope 1
2 Normative References 1
3 Terms and Definitions 2
4 Requirements 2
5 Test Method 7
6 Inspection Classification Rules 10
7 Marking, Packaging, Transportation and Storage 14
Appendix A (Normative) Test Methods for Pulling-out Force of Buckle of the Finished Product 15
Necktie
1 Scope
This standard specifies the requirements, test method and inspection classification rules for neckties as well as its marking, packaging, transportation, storage and other technical features.
This standard is applicable to the necktie of the textile fabrics as its main shell fabric.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding amending error in the text) to, or revisions of, any of these publications do not be applied. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to these specifications.
GB/T 250 Textiles - Tests for color fastness - Grey scale for assessing change in color
GB/T 251 Textiles - Tests for color fastness - Grey scale for assessing staining
GB/T 2910 Textile - Binary fiber mixtures - Quantitative chemical analysis
GB/T 2911 Textiles - Ternary fiber mixtures - Quantitative analysis
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3920 Textiles - Tests for color fastness - Color fastness to rubbing
GB/T 3921 Textiles - Tests for color fastness - color fastness to soaping
GB/T 3922 Textiles - Testing method for color fastness to perspiration
GB/T 4841.3 Color cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB 5296.4 Instructions for use of products of consumer interest - Instructions for use of textiles and apparel
GB/T 5711 Textiles - Tests for color fastness - Color fastness to dry cleaning
GB/T 5713 Textiles - Tests for color fastness - Color fastness to water
GB/T 3921 Textiles - Textiles-Tests for color fastness - Color fastness to hot pressing
GB/T 7573 Textiles - Determination of pH of the aqueous extract
GB/T 8427 Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test
GB/T 8629 Textiles - Domestic washing and drying procedures for textile testing
GB/T 17592 Textiles - Determination of the banned azo colourants
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19981.2 Textiles-Textiles-Professional care, dry cleaning and wet cleaning of fabrics and garments Part2: Procedure for testing performance when dry cleaning and finishing using perchloroethylene
FZ/T 01026 Quaternary fiber mixtures - Quantitative chemical analysis
FZ/T 01053 Textiles - Identification of fiber content
FZ/T 01057 (all parts) Test method for identification of textile fibers
FZ/T 80002 Marking, packaging, transportation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
Necktie of vertical bar type
Its finished product is vertical bar type and doesn't form a knot, See Figure 1a).
3.2
Necktie of shaped tie
The knot of fixed shape has been formed on its finished product, See Figure 1b), Figure 1c).
3.3
Petty band
In the necktie of shaped tie, it refers to the position between the sharp corner point on the small end and the seam section on tail end of the zipper, See Figure 1c).
3.4
Neckband
In the necktie of shaped tie, it refers to the position that is used for wearing ties to the neck, See Figure 1b).
3.5
Buckle
In the necktie of shaped tie, it refers to the part to eliminate the possibly generated hazard in the disconnection when the neckband is excessively tightened, See Figure 1b).
3.6
Conceal seam
It is inside the necktie as the line segment of the necktie suture for buffering and elasticity.
3.7
Pulling-out force
It refers to the required maximum tension in the disconnection caused when buckle is in the combination of reversed tension.
4 Requirements
4.1 Directions for use
4.1.1 Directions for use of the finished product shall be implemented according to those specified in GB 5296.4 and GB 18401.
4.1.2 The trimmed size shall be labeled as the full length * width of the big end in centimeter.
4.2 Specification
4.2.1 The trimmed size may be designed by oneself as required.
4.2.2 Necktie of vertical bar type, See Figure 1a).
4.2.3 Necktie of shaped tie, See Figure 1b) (front face ), Figure 1 c) (rear surface ).
