標準編號:	GB/T 19228.2-2011
中文名稱:	不銹鋼卡壓式管件組件 第2部分：連接用薄壁不銹鋼管
英文名稱:	Stainless steel press-fitting assemblies - Part 2: Light gauge stainless steel tubes for press-fittings
中標分類:	J15    管路附件
行業分類:	GB    國家標準
ICS分類:	23.040.60 23.040.60    法蘭、管接頭及其連接件 23.040.60
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2011-6-16
實施日期:	2012-3-1
標準狀態:	valid
替代舊標準:	GB/T 19228.2-2003 不銹鋼卡壓式管件連接用薄壁不銹鋼管
翻譯語言:	英文
文件格式:	PDF
中文字符數:	14000 字
翻譯價格(元):	840.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 19228 specifies ordering information, dimensions and tolerances, weight, technical requirements, inspection, designation, markings, packaging, storage and transportation of light gauge stainless steel tubes (hereinafter referred to as "steel tubes") for stainless steel press-fitting assemblies. Stainless steel tubes specified in this part are applicable to industrial pipeline system for water supply. 2 Normative References The following normative document contains provisions which, through reference in this text, constitute provisions of this part of GB/T 19228. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 223.11 Iron Steel and Alloy — Determination of Chromium Content — Visual Titration or Potentiometric Titration Method GB/T 223.16 Methods for Chemical Analysis of Iron, Steel and Alloy — the Chromotropic Acid Photometric Method for the Determination of Titanium Content GB/T 223.25 Methods for Chemical Analysis of Iron, Steel and Alloy — The Dimethylglyoxime Gravimetric Method for the Determination of Nickel Content GB/T 223.28 Methods for Chemical Analysis of Iron, Steel and Alloy — The α-denzoinoxime Gravimetric Method for the Determination of Molybdenum Content GB/T 223.37 Methods for Chemical Analysis of Iron, Steel and Alloy — The Indophenal Blue Photometric Methods for the Determination of Nitrogen Content after Distillation Separation GB/T 223.40 Iron Steel and Alloy — Determination of Niobium Content by The Sulphochlorophenol S Spectrophotometric Method GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy — The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content GB/T 223.62 Methods for Chemical Analysis of Iron, Steel and Alloy — The Butyl Acetate Extraction Photometric Method for the Determination of Phosphorus Content GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy — The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy — The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content GB/T 228 Metallic Materials — Tensile Testing at Ambient Temperature (GB/T 228-2002, eqv ISO 6892:1998) GB/T 241 Metal Materials — Tube — Hydrostatic Pressure Test GB/T 242 Metallic Materials — Tube — Drift Expanding Test GB/T 246 Metallic Materials — Tube — Flattening Test (GB/T 246-2007, ISO 8492:1998, IDT)

Foreword II 1 Scope 2 Normative References 3 Ordering Information 4 Dimensions and Tolerances 5 Weight 6 Technical Requirements 7 Inspection 8 Designation and Marking 9 Packaging, Storage and Transportation