標準編號:	GB/T 18488.2-2006
中文名稱:	電動汽車用電機及其控制器 第2部分:試驗方法
英文名稱:	The electrical machines and controllers for electric vehicles - Part 2: Test methods
中標分類:	T47    新能源汽車及其他類型汽車
行業分類:	GB    國家標準
發布機構:	國家質量監督檢驗檢疫總局
發布日期:	2006-12-1
實施日期:	2007-7-1
標準狀態:	superseded
被新標準替代:	GB/T 18488.2-2015 電動汽車用驅動電機系統 第2部分：試驗方法
被替代日期:	2015-9-1
替代舊標準:	GB/T 18488.2-2001 電動汽車用電機及其控制器試驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	12000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

1 Scope This Part specifies the apparatus, instruments, test preparation and each test methods used for testing the electrical machines and controllers for electric vehicles. This Part applies to the electrical machines and controllers for electric vehicles. 2 Normative References The following standards contain provisions which, through reference in this Part of GB/T 18488, constitute provisions of this Part. For dated references, subsequent amendments (excluding corrections to) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions of the normative documents are applicable to this Part. GB 755-2000 Rotating Electrical Machines-Rating and Performance (idt IEC 60034-1:1996) GB/T 1029-2005 Test Procedures for Three-phase Synchronous Machines (IEC 60034-2: 1972) GB/T 1032-2005 Test Procedure for Three-phase Induction Motors GB/T 2423.17-1993 Basic Environmental Testing Procedures for Electric and Electronic Products Test Ka: Salt Mist (eqv IEC 60068-2-11: 1981) GB/T 3859.1-1993 Semiconductor Convertors-Specification of Basic Requirements (eqv IEC 60146-1-1: 1991) GB/T 4942.1-2006 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code)- Classification (IEC 60034-5: 2000, IDT) GB/T 4942.2-1993 Degrees of Protection Provided by Enclosures for Low-voltage Apparatus (eqv. IEC 60947-1:1988) GB/T 10068-2000 Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher-Measurement, Evaluation and Limits of Vibration (idt IEC 60034-14: 1996) GB/T 10069.1-2006 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits-Part 1: Method for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines (ISO 1608: 1999, MOD) GB/T 12665-1990 Requirements of Damp-heat Testing of Electrical Machine for Service in General Environmental Condition GB/T 13422-1992 Power Semiconductor Converters-Electrical Test Methods GB/T 14023-2006 Vehicles Boats and Internal Combustion Engine Driven Devices-Radio Disturbance Characteristics-Limits and Methods of Measurement (CSPR 12: 2005, IDT) GB 14711-2006 Safety Requirements of Small and Medium Size Rotating Electrical Machines (neq IEC 60034-1) GB/T 17619-1998 Limits and Methods of Testing for Immunity of Electrical/Electronic Sub-assemblies in Vehicles to Electromagnetic Radiation JB/T 9615.1-2000 Test Methods of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines JB/T 9615.2-2000 Test Limits of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines 3 Test Preparation

Contents Foreword I 1 Scope 2 Normative References 3 Test Preparation 4 General Test Items 5 Environmental Test 6 Temperature Rise Test 7 Characteristics and Efficiency Testing for Electrical Machine Torque 8 Regenerated Energy Feedback Test 9 Electromagnetic Compatibility Testing