標準編號:	GB/T 1796.2-2016
中文名稱:	輪胎氣門嘴 第2部分：膠座氣門嘴
英文名稱:	Tyre valves―Part 2:Rubber base valves
中標分類:	G41    輪胎
行業分類:	GB    國家標準
ICS分類:	83.160.01 83.160.01    輪胎綜合 83.160.01
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2016-02-24
實施日期:	2017-1-1
標準狀態:	superseded
被新標準替代:	GB/T 1796.2-2024 輪胎氣門嘴 第2部分：膠座氣門嘴
被替代日期:	2025-4-1
替代舊標準:	GB 1796.2-2008 輪胎氣門嘴 第2部分：膠座氣門嘴
翻譯語言:	英文
文件格式:	PDF
中文字符數:	41000 字
翻譯價格(元):	1800.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 1796 specifies the terms and definitions, model designation, structural types, types, structural dimensions and materials of components, appearance, rubber base edge thickness, maximum pressure of use, sealing performance, adhesion strength and adhesion rate between rubber and metal stem, test methods, inspection rules, marking, packaging and storage of rubber base valves (hereinafter referred to as "valves"). This part is applicable to valves for tubes of industrial vehicles, agricultural vehicles, engineering machinery, motorcycles, electric vehicles and cycles. This part is not applicable to air valves for aircraft tyres. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 1796.6 Tyre valves - Part 6: Cores GB 1796.7 Tyre valves - Part 7: Components GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB 9764 Tyre valve core chambers GB 9765 Tyre valve threads GB/T 9766.2 Test method for tyre valves - Part 2:Rubber base valves test methods GB/T 9766.6 Test method for tyre valve - Part 6: Test method for core GB/T 12839 Terms and definitions of tyre valves GB/T 21285 Tubes valves - Identification system for valves and their components 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 12839 apply.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Model designation 5 Structural types 6 Types, structural dimensions and materials of components 7 Appearance 8 Rubber base edge thickness 9 Maximum pressure of use 10 Sealing performance 11 Adhesion strength and adhesion rate between rubber and metal stem 12 Test methods 13 Inspection rules 14 Marking, packaging and storage Annex A (Informative) Comparison of models between this part and foreign standard