標準編號:	GB/T 1796.1-2016
中文名稱:	輪胎氣門嘴 第1部分：壓緊式內胎氣門嘴
英文名稱:	Tyre valves―Part 1:Tube clamp-in valves
中標分類:	G41    輪胎
行業分類:	GB    國家標準
ICS分類:	83.160.01 83.160.01    輪胎綜合 83.160.01
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2016-02-24
實施日期:	2017-1-1
標準狀態:	valid
替代舊標準:	GB 1796.1-2008 輪胎氣門嘴 第1部分：壓緊式內胎氣門嘴
翻譯語言:	英文
文件格式:	PDF
中文字符數:	15000 字
翻譯價格(元):	600.0
交付時間:	付款后 1 個工作日

1 Scope This part of GB/T 1796 specifies the terms and definitions, model designation, structural types, types, structural dimensions and materials of components, appearance, maximum pressure of use, sealing performance, assembly torque of hex nut and valve stem, test methods, inspection rules, marking, packaging and storage of clamp-in valves (hereinafter referred to as "valves"). This part is applicable to valves for tubes of motorcycles and cycles. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB 1796.6 Tyre valves - Part 6: Cores GB 1796.7 Tyre valves - Part 7: Components GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB 9764 Tyre valve core chambers GB 9765 Tyre valve threads GB/T 9766.1 Test method for tyre valves - Part 1: Test method for tube clamp-in valves GB/T 12839 Terms and definitions of tyre valves GB/T 21285 Tubes valves - Identification system for valves and their components 3 Terms and definitions For the purpose of this document, the terms and definitions specified in GB/T 12839 apply. 4 Model designation The model designation of the product shall meet the requirements of GB/T 21285. See Annex A for the comparison of models between this part and foreign standard. 5 Structural type The structural types of valves shall meet the requirements of Table 1 and Figures 1~4. All linear dimensions in this part are expressed in millimeters.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Model designation 5 Structural type 6 Types, structural dimensions and materials of components 7 Appearance 8 Maximum pressure of use 9 Sealing performance 10 Assembly performance of valve stem 11 Test methods 12 Inspection rules 13 Marking, Packaging and Storage Annex A (Informative) Comparison of models between this part and foreign standard