標準編號:	GB/T 17851-2010
中文名稱:	產品幾何技術規范（GPS）　幾何公差　基準和基準體系
英文名稱:	Geometrical Product Specifications(GPS)—Geometrical tolerancing—Datums and datum system
中標分類:	J04    基礎標準與通用方法
行業分類:	GB    國家標準
ICS分類:	01.100.20 01.100.20    機械工程制圖 01.100.20
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2011-1-10
實施日期:	2011-10-1
標準狀態:	superseded
被新標準替代:	GB/T 17851-2022 產品幾何技術規范（GPS） 幾何公差 基準和基準體系
被替代日期:	2023-4-1
替代舊標準:	GB/T 17851-1999 形狀和位置公差 基準和基準體系
翻譯語言:	英文
文件格式:	PDF
中文字符數:	16000 字
翻譯價格(元):	960.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the definition of datums and datum systems for geometrical tolerancing, indications on technical drawings and practical embodiments. This standard is applicable to the basic rules for establishing datums by using simulated datum features and associated features of datum features. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard, however parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies. GB/T 1182 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (GB/T 1182-2008, ISO 1101:2004, IDT) GB/T 16671 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (GB/T 16671-2009, ISO 2692:2006, MOD) GB/T 18780.1-2002 Geometrical Product Specification (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999, IDT) GB/Z 20308 Geometrical Product Specifications (GPS) - Masterplan (GB/Z 20308-2006, ISO/TR 14638:1995, MOD) GB/Z 24637.1-2009 Geometrical Product Specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/TS 17450-1:2005, IDT) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in GB/T 1182, GB/T 16671, GB/T 18780.1-2002 and GB/Z 24637.1-2009 and the following apply.

Foreword II 1 Scope 2 Normative references 3 Terms and definitions 4 Establishing of datums 5 Application of datums 6 Indication of datums and datum systems 7 Datum targets 7.1 Symbols for datum targets 7.2 Application of the datum targets 8 Three-plane datum system Annex A (Informative) Position in GPS matrix model