1 Scope
This standard specifies the principle, test equipment, sample, test conditions, test procedure, test result and test report, etc. of tension-tension fatigue of fiber reinforced plastic laminates.
This standard is applicable to the determination of the medium value S-N curve of tension-tension fatigue and condition fatigue limit of continuous fiber reinforced plastic laminates symmetrically in unidirectional, orthogonal and multiway direction.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 1446 Fiber-reinforced Plastics Composites - The Generals for Determination of Properties
GB/T 3354 Test Method for Tensile Properties of Oriented Fiber Reinforced Plastics
GB/T 10623 Metallic Materials - Terms of Mechanical Test
HB/Z 112 Statistical Analysis Method for Fatigue Test of Materials
3 Terms and Definitions
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Test Equipment
6 Sample
7 Test Conditions
8 Test Procedure
9 Test Result
10 Test Report
