標準編號:	GB/T 1346-2024
中文名稱:	水泥標準稠度用水量、凝結時間與安定性檢驗方法
英文名稱:	Test methods for water requirement of standard consistency|| setting time and soundness of the portland cement
行業分類:	GB    國家標準
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2024-12-31
實施日期:	2025-7-1
標準狀態:	to be valid
替代舊標準:	GB/T 1346-2011 水泥標準稠度用水量、凝結時間、安定性檢驗方法
翻譯語言:	英文
文件格式:	PDF
中文字符數:	19000 字
翻譯價格(元):	1330.0
交付時間:	付款后 1 個工作日

GB/T 1346-2024 Test methods for water requirement of standard consistency, setting time and soundness of the portland cement 1 Scope This document specifies the principle, apparatus, test water, test conditions and determination methods of water requirement of standard consistency, setting time and test methods for volume soundness mainly caused by free calcium oxide. This document is applicable to the test for water requirement of standard consistency, setting time and soundness of general portland cement. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6682 Water for analytical laboratory use - Specification and test methods GSB 14-1510 Standard cement sample for strength inspection JC/T 727 Apparatus for determining normal consistency and setting time of cement paste JC/T 729 Mixer for cement paste JC/T 954 Le Chatelier for determining soundness of cement paste JC/T 955 Boiling box for determining soundness of cement JC/T 962 Tester for determining expansion of Le Chatelier needles 3 Terms and definitions 3.1 water requirement of standard consistency percentage of water consumed for paste mixing on the cement mass when the cement paste reaches the standard consistency state 3.2 setting time time required from the moment when the cement is added to the water to the moment when the test needle sinks into the paste to a certain depth under the condition that the cement paste reaches the standard consistency Note: It includes initial setting time and final setting time. 3.3 soundness ability of cement paste to maintain a stable volume after hardening Note: It is characterized by Le Chatelier test or test pat method. 4 Principle 4.1 Standard consistency of cement The paste of standard consistency for cement has certain resistance to the sinking of the standard test bar (or test cone). Metal test bar (test bar method) or test cone (test cone method) is used to sink cement paste with different moisture contents. When the test bar or test cone can stay at the specified balance position, the moisture content is the water requirement of standard consistency, and the paste is cement paste of standard consistency. 4.2 Soundness after boiling 4.2.1 Le Chatelier test

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Principle 5 Apparatus 6 Test water 7 Test conditions 8 Determination method for water requirement of standard consistency - Test bar method (reference method) 9 Determination method for water requirement of standard consistency - Test cone method (substitute method) 10 Determination method for setting time 11 Determination method of soundness - Le Chatelier soundness test (reference method) 12 Determination method for soundness - Test pat method (substitute method) 13 Inspection report