標準編號:	GB/T 13397-2024
中文名稱:	合金內氧化法銀金屬氧化物電觸頭技術規范
英文名稱:	Technical specification for silver-metaloxide electrical contacts by alloy internal oxidation method
中標分類:	K14    電工合金零件
行業分類:	GB    國家標準
ICS分類:	29.120.99 29.120.99    其他電工器件 29.120.99
發布機構:	國家市場監督管理總局 國家標準化管理委員會
發布日期:	2024-10-26
實施日期:	2025-5-1
標準狀態:	valid
替代舊標準:	GB/T 13397-2008 合金內氧化法銀金屬氧化物電觸頭技術條件
翻譯語言:	英文
文件格式:	PDF
中文字符數:	21000 字
翻譯價格(元):	1470.0
交付時間:	付款后 1~5 個工作日

GB/T 13397-2024 Technical specification for silver-metaloxide electrical contacts by alloy internal oxidation method 1 Scope This document specifies the requirements, inspection rules, marking, packaging, transportation and storage of silver metaloxide sheet electrical contacts (hereinafter referred to as "electrical contacts") such as silver-cadmium oxide, silver-zinc oxide and silver-copper oxide manufactured by alloy internal oxidation process (including internal oxidation process and pre-oxidation process), and describes the corresponding testing methods. This document is applicable to silver metaloxide sheet electrical contacts such as silver-cadmium oxide, silver-zinc oxide and silver-copper oxide manufactured by alloy internal oxidation process, which are mainly used in various low-voltage switching appliances. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 2900.4 Electrotechnical terminology - Special alloys for electrical equipment GB/T 5586 Test method for essential property of electrical contact materials GB/T 5587 Basic shapes, dimensions, symbols and notations of silver based electrical contacts GB/T 26871 Metallographic examination methods of the electrical contact materials JB/T 7774 (all parts) Test methods for chemical analysis of silver-zinc oxide electric contact material JB/T 7776 (all parts) Test method for chemical analysis silver-cadmium oxide electric contact material 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 2900.4 apply. 4 Requirements 4.1 Appearance The surface of the electrical contact product shall be free from cracks, bubbles, missing edges, missing corners, visible depressions and spots. The thickness of the electrical contact product shall not exceed 1mm, and the burr height of the edge shall not exceed 0.03mm. The burr height of the electrical contact product shall not exceed 0.05mm if the thickness of the electrical contact product is greater than 1mm. When the welding surface and working surface of silver-metaloxide electrical contact products are visually indistinguishable, they shall be marked. If there are special requirements, they shall be decided by negotiation between the supplier and the purchaser. 4.2 Dimensional tolerances and notations The dimensional tolerances and notations of the electrical contacts shall meet the requirements of GB/T 5587, or shall be decided by negotiation between the supplier and the purchaser. 4.3 Chemical composition The chemical composition of the electrical contact shall meet the requirements of Table 1, or shall be decided by negotiation between the supplier and the purchaser.

Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements 4.1 Appearance 4.2 Dimensional tolerances and notations 4.3 Chemical composition 4.4 Physical and mechanical properties 4.5 Metallographic structure 5 Testing methods 5.1 Appearance 5.2 Dimensions 5.3 Chemical composition 5.4 Physical and mechanical properties 5.5 Metallographic structure 6 Inspection rules 6.1 Batching rules 6.2 End-of-manufacturing provisions 6.3 Inspection items and sequence 6.4 Sampling scheme and judgment rules 7 Marking, packaging and storage 7.1 Marking 7.2 Packaging 7.3 Transportation 7.4 Storage 7.5 Special description Annex A (Informative) Determination of copper content in copper oxide A.1 Principle A.2 Reagent A.3 Preparation and calibration of sodium thiosulfate standard solution A.4 Analytical method Annex B (Normative) Secondary sampling scheme for normal inspection

合金內氧化法銀金屬氧化物電觸頭技術規范 1 范圍 本文件規定了合金內氧化工藝(包括內氧化工藝和預氧化工藝)制造的銀氧化鎘、銀氧化鋅、銀氧化銅等銀金屬氧化物片狀電觸頭(以下簡稱“電觸頭”)的要求、檢驗規則、標志、包裝、運輸和貯存，描述了相應的檢測方法。 本文件適用于合金內氧化工藝制造的銀氧化鎘、銀氧化鋅、銀氧化銅等銀金屬氧化物片狀電觸頭，這些產品主要應用于各種低壓開關電器。 2 規范性引用文件 下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中，注日期的引用文件，僅該日期對應的版本適用于本文件;不注日期的引用文件，其最新版本( 包括所有的修改單)適用于本文件。 GB/T 2828.1-2012 計數抽樣檢驗程序 第 1部分:按接收質量限( AQL)檢索的逐批檢驗抽樣計劃 GB/T 2900.4 電工術語 電工合金 GB/T 5586 電觸頭材料基本性能試驗方法 GB/T 5587 銀基電 觸頭基本形狀、尺寸、符號及標注 GB/T 26871 電觸頭材料金相試驗方法 JB/T 7774 (所有部分) 銀氧化鋅電 觸頭材料化學分析方法 JB/T 7776(所有部分) 銀氧化鎘電觸頭材料化學分析方法 3 術語和定義 GB/T 2900.4界定的術語和定義適用于本文件。 4 要求 4.1 外觀 電觸頭產品表面應無裂紋、鼓泡、缺邊、缺角與目視可見凹陷及斑點，電觸頭產品厚度不大于1 mm其邊緣毛刺高度不應超過0.03mm，電觸頭產品厚度大于1mm毛刺高度不應超過0.05mm。銀金屬氧化物電觸頭產品的焊接面與工作面目視無法區分時，應有標記，有特殊要求時，由供需雙方協商決定。 4.2 尺寸公差、標注 電觸頭的尺寸公差、標注應符合GB/T 5587的規定，或由供需雙方協商決定。 4.3 化學成分 電觸頭的化學成分應符合表1的規定，或由供需雙方協商決定。