標準編號:	GB/T 12618.2-2006
中文名稱:	開口型平圓頭抽芯鉚釘 30級
英文名稱:	Open End Blind Rivets with Break Pull Mandrel and Protruding Head-Property Class 30
中標分類:	J13    緊固件
行業分類:	GB    國家標準
ICS分類:	21.060.40 21.060.40    鉚釘 21.060.40
發布機構:	國家質量監督檢驗檢疫總局 國家標準化管理委員會
發布日期:	2006-07-05
實施日期:	2006-12-1
標準狀態:	valid
替代舊標準:	GB/T 12618-1990 GB 12618-1990 開口型扁圓頭抽芯鉚釘
翻譯語言:	英文
文件格式:	PDF
中文字符數:	6000 字
翻譯價格(元):	200.0
交付時間:	付款后 1 個工作日

GB/T 12618.2-2006 Open End Blind Rivets with Break Pull Mandrel and Protruding Head-Property Class 30 1 Scope This part specifies the mechanical properties and application data of Open end blind rivets with break pull mandrel and protruding head-property class 30 with the rivet body diameter d=2.4 mm~6.4 mm, the rivet body material of aluminum alloy (AlA) and the rivet core material of steel (St). 2 Normative References The following normative documents contain provisions which, through reference in this Part of GB/T 12618, constitute provisions of this part. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Part are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies. GB/T 90.1 Fasteners - Acceptance inspection (GB/T 90.1-2002, idt ISO 3269: 2000) GB/T 90.2 Fasteners--Marking and packaging GB/T 699 Quality carbon structural steels GB/T 1237 Designation system for fasteners (GB/T 1237-2000, eqv ISO 8991: 1986) GB/T 3098.18 Mechanical properties of fasteners--Blind rivets testing (GB/T 3098.18-2004, ISO 14589: 2000, Blind rivets-Mechanical testing, IDT) GB/T 3098.19 Mechanical properties of fasteners-Blind rivets with break pull mandrel GB/T 3099.2 Terminology of fasteners-Blind rivets (GB/T 3099.2-2004, ISO 14588: 2000, Blind rivets- Terminology and definitions, IDT) GB/T 3206 Carbon constructional quality steel wires GB/T 5267.1 Fasteners - Electroplated coatings (GB/T 5267.1-2002, idt ISO 4042: 1999 IDT) GB/T 9800 Chromate conversion coatings on electroplated zinc and cadmium coatings (GB/T 9800-1988, eqv ISO 4520: 1981) 3 Dimension 3.1 General provisions Dimension code and marks shall meet those specified in GB/T 3099.2. 3.2 Rivet dimension

Foreword II 1 Scope 2 Normative References 3 Dimension 3.1 General provisions 3.2 Rivet dimension 3.3 Rivet hole diameter 4 Material Combinations and Surface Treatment 5 Mechanical Properties 5.1 Shear load, tensile load and rivet core breaking load 5.2 Rivet core dismantlement ability 5.3 Rivet head holding capacity 6 Performance Quality 7 Acceptance Inspection, Marking and Packaging 8 Designation Annex A