標準編號:	GB/T 1048-2005
中文名稱:	管道元件PN(公稱壓力)的定義和選用
英文名稱:	Pipework Components-Definition and Selection of PN
中標分類:	J15    管路附件
行業分類:	GB    國家標準
ICS分類:	23.040.60 23.040.60    法蘭、管接頭及其連接件 23.040.60
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國家標準化管理委員會
發布日期:	2005-01-13
實施日期:	2005-8-1
標準狀態:	superseded
被新標準替代:	GB/T 1048-2019 管道元件 公稱壓力的定義和選用
被替代日期:	2019-12-1
替代舊標準:	GB/T 1048-1990 管道元件公稱壓力
翻譯語言:	英文
文件格式:	PDF
中文字符數:	2000 字
翻譯價格(元):	60.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the definition and series of PN (nominal pressure). This standard is applicable to pipe components marked with PN and specified in the relevant standard. 2 Definitions PN: It is relevant to the mechanical property and size characteristics of components of the pipe system and is the sign of the combination of letters and figures. It consists of letter PN and dimensionless figures. Note 1: Figures after the letter PN do not stand for measured values, shall not be applied to calculation, unless otherwise stated in the relevant standards. Note 2: Unless related with relevant standards of pipe components, the term PN has no meaning: Note 3: Allowable pressure of pipework components depends on the PN value, materials, design and allowable working temperature of components, allowable pressure is given in the corresponding table of standard pressure temperature level. Note 4: All the pipe components with the same PN and DN values shall have the same matching size with the matchable flange.