標準編號:	GB/T 10184-1988
中文名稱:	電站鍋爐性能試驗規程
英文名稱:	Performance test code for utility boiler
中標分類:	J98    鍋爐及其輔助設備
行業分類:	GB    國家標準
ICS分類:	27.060.30 27.060.30    鍋爐和熱交換器 27.060.30
發布機構:	國家標準化管理委員會
發布日期:	1988-1-2
實施日期:	1989-7-1
標準狀態:	superseded
被新標準替代:	GB/T 10184-2015 電站鍋爐性能試驗規程
被替代日期:	2016-7-1
作廢日期:	2016-07-01
翻譯語言:	英文
文件格式:	PDF
中文字符數:	64000 字
翻譯價格(元):	1900.0
交付時間:	付款后 1 個工作日

This standard specifies the performance test method of utility boiler as the reference for the verification test (hereinafter referred to as "acceptance test" generally) and acceptance test on the performance of boiler. This standard is applicable to the steam boiler with evaporative capacity above 35t/h or 35t/h and the pressure at steam outlet being higher than 2.45MPa or the temperature at exceeding 400℃. The performance test on the power generation boiler of the other parameters may be implemented by making reference thereto. This standard is also applicable to the thermal efficiency test of boilers that is carried out for other purposes (such as condition adjustment, fuel variation, and equipment innovation). This standard is not applicable to the performance test on the steam generators in nuclear power stations.

1 Subject Contents and Application Scope 2 Normative References 3 Terms, Symbols and Codes 4 Guideline 5 Test Methods and Measuring Instruments 6 Calculation of Thermal Efficiency 7 Thermal Efficiency Converted into Guaranteed Conditions 8 Net Boiler Efficiency 9 Boiler Evaporative Capacity, Steam Parameter and Other Operating Characteristics Tests 10 Error Analyses 11 Test Report Annex A Common Legal Measuring Unit and their Conversion (Informative) Annex B Conversion of ppm and mg/m3 of Various Gas Concentrations (Informative) Annex C Characteristics of Common Gas and Ash (Additional) Annex D Specific Heat of Coal and Ash (Additional) Annex E Boiler Ash and slag Balance Percent (Additional) Annex F Boiler Heat Loss due to Radiation at Rated Load (Additional) Annex G Humid Air Alignment Chart (Additional) Annex H Constant Section Division Principles of Grid Method and Determination of Representative Points (Additional) Annex I Layout of Differential Pressure Conveyer Pipes among Throttle Devices of Flow Measurement (Additional) Annex J Reading Revision of Spring Pressure Gauge and Sealing Liquid and Application of Liquid Column Type Pressure Meter (Additional) Annex K Measurement and Calculation of Air Pre-heater Leakage Rate (Additional) Annex L Elimination Method of Blunder Error (Referential) Annex M Error Calculation Examples (Referential) Annex N Temperature Measuring Equipment (Additional) Annex O Flue Gas Multidraw Blender (Additional) Annex P Settlement Ash Collector (Additional) Annex Q Water and Steam Sampling Device (Additional)