標準編號:	GB/T 10004-2008
中文名稱:	包裝用塑料復合膜、袋干法復合、擠出復合
英文名稱:	Plastic Laminated Films and Pouches for Packaging - Dry Lamination and Extrusion Lamination
中標分類:	G33    塑料型材
行業分類:	GB    國家標準
ICS分類:	83.140.10 83.140.10    薄膜和薄板 83.140.10
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2008-12-31
實施日期:	2009-8-1
標準狀態:	valid
替代舊標準:	GB/T 10004-1998 耐蒸煮復合膜 、袋 GB/T 10005-1998 雙向拉伸聚丙烯（BOPP）/低密度聚乙烯（LDPE）復合膜、袋
翻譯語言:	英文
文件格式:	PDF
中文字符數:	10000 字
翻譯價格(元):	240.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the classification, requirements, test methods, inspection rules, marks, packaging, transportation and storage of the laminated films and pouches for packaging being produced by dry lamination and extrusion lamination process of different plastic materials. This standard is applicable to the plastic and plastic laminated films and pouches for food and non-food packaging. This standard is neither applicable to the plastic films and pouches being laminated by plastic material and paper base (or aluminum foil) nor to the plastic films and pouches being produced by wet lamination and direct coextru-lamination process. 2 Normative References The following standard contains provisions which, through reference in the following text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding correction) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 191 Packaging - Pictorial Marking for Handling of Goods (GB/T 191 - 2008, ISO 780: 1997, MOD) GB/T 1037 - 1988 Test Method for Water Vapor Transmission of Plastic Film and Sheet-cup Method GB/T 1038 - 2000 Plastics--Film and Sheeting--Determination of Gas Transmission--Differential-pressure Method GB/T 1040.3 - 2006 Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets (ISO 527-3:1995, IDT) GB/T 1410 - 2006 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials (IEC 60093: 1980, IDT) GB/T 2410 - 2008 Determination of the Luminous Transmittance and Haze of Transparent Plastics GB/T 2828.1 - 2003 Sampling Procedures for Inspection by Attributea- Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999, IDT) GB/T 2918 - 1998 Plastics--Standard Atmospheres for Conditioning and Testing (idt ISO 291:1997) GB/T 5009.60 Method for Analysis of Hygienic Standard of Products of Polyethylene, Polystyrene and Polypropyrene for Food Packaging GB/T 5009.119 Determination of Diaminomethylbezen of Complex for Food Packaging Material GB/T 6672 - 2001 Plastics Film and Sheeting--Determination of Thickness by Mechanical Scanning (idt ISO 4593:1993) GB/T 6673 - 2001 Determination of Length and Width of Plastics Film and Sheeting (idt ISO 4592: 1992) GB/T 7707 The Intaglio Prints for Decorating GB/T 8808 - 1988 Test Method for Peel Force of Flexible Laminated Plastics GB/T 8809 - 1988 Test Method for Pendulum Impact Resistance of Plastic Films GB 9683 Hygienic Standard for Composite Laminated Food Packaging Bag

1 Scope 2 Normative References 3 Classifications 4 Hygienic Indexes of Raw Materials and Additives 5 Requirements 6 Test Methods 7 Inspection Rules 8 Mark, Package, Transportation and Storage