1.0.1 This standard is established to unify the method for evaluation of concrete compressive strength, promote enterprise to improve its management level and ensure the quality of concrete compressive strength.
1.0.2 This standard is applicable to evaluation of compressive strength of ordinary concrete and light-weight aggregate concrete.
As for concrete with special requirements, the evaluation for its strength shall also meet the relevant requirements of the current national standard.
1.0.3 In addition to the requirements of this standard, the evaluation of concrete compressive strength shall also comply with the relevant requirements of the current national standard.
Note: as for the engineering designed according to TJ 10-74 Code for Design of Rebar Concrete Structure, when using this standard to carry out evaluation of concrete compressive strength, it's required to convert concrete mark adopted in design into concrete strength grade according to the requirements of Annex 1 in this standard. The concrete mixing strength during construction shall also be converted according to the same principle.
Chapter 1 General Rules
Chapter 2 General Requirements
Chapter 3 Concrete Sampling, Production, Maintenance and Test of Specimen
Chapter 4 Evaluation of Concrete Compressive Strength
Section 1 Evaluation of Statistical Method
Section 2 Evaluation of Non-statistical Method
Section 3 Acceptability Judgement of Concrete Compressive Strength
Annex 1 Conversion Relation of Concrete Mark and Concrete Strength Grade
Annex 2 Construction Mixing Strength of Concrete
Annex 3 Production Quality Level of Concrete
Annex 4 Conversion Relation of Conventional Non-legal Measurement Unit and Legal Measurement Unit
Annex 5 Explanation of Wording in This Standard
Additional Information
