標準編號:	GB 50227-2008
中文名稱:	并聯電容器裝置設計規范
英文名稱:	Code for Design of Installation of Shunt Capacitors
中標分類:	P91    電氣設備安裝工程
行業分類:	GB    國家標準
ICS分類:	31.060 31.060    電容器 31.060
發布機構:	住房和城鄉建設部 國家質量監督檢驗檢疫總局
發布日期:	2008-12-15
實施日期:	2009-6-1
標準狀態:	superseded
被新標準替代:	GB 50227-2017 并聯電容器裝置設計規范
被替代日期:	2017-11-1
替代舊標準:	GB 50227-1995 并聯電容器裝置設計規范
翻譯語言:	英文
文件格式:	PDF
中文字符數:	20000 字
翻譯價格(元):	560.0
交付時間:	付款后 1 個工作日

1.0.1 This code is formulated with a view to implementing the national technical economy policy, achieving safety, credibility, state-of-the-art technology; economic feasibility and convenience of operating and maintenance in the design of shunt capacitors of electrical engineering. 1.0.2 This code is applicable to the construction and extension engineering design of three-phase alternating current high-voltage and low-voltage shunt capacitors for reactive compensation in the electric substation or power distribution station (room) with voltage grade at or under 750kV. 1.0.3 The design of shunt capacitors shall determine the compensation capacity, mode of connection, corollary equipment, protection and control mode, and arrangement and installation mode according to the requirements of electric network condition, compensation requirement, environmental condition, operating maintenance at the installation site and the practical experiences. 1.0.4 The selection of shunt capacitors shall comply with those specified in the related national current standards. 1.0.5 The design of shunt capacitors shall not only implement this code, but also shall comply with those specified in the related national current standards.

1 General Provisions 2. Terms, Symbols and Code Name 2.1 Terms 2.2 Symbols 2.3 Code Name 3 Basic Requirements on Accessing into Electric Network 4 Electrical Wiring 4.1 Wiring Mode 4.2 Corollary Equipments and Their Connection 5 Selections of Electric Appliance and Conductor 5.1 General Provisions 5.2 Capacitor 5.3 Circuit Breaker 5.4 Fuse Protector 5.5 Series Reactor 5.6 Discharge Device 5.7 Lightning Arrester 5.8 Conductor and Others 6 Protection Device and Fling-cut Device 6.1 Protection Device 6.2 Fling-cut Device 7 Control Circuit, Signal Circuit and Measurement Instrument 7.1 Control Circuit and Signal Circuit 7.2 Measurement Instrument 8 Arrangement and Erection Design 8.1 General Provisions 8.2 Arrangement and Erection Design of Shunt Capacitor Bank 8.3 Arrangement and Erection Design of Series Reactor 9 Fire Protection and Ventilation 9.1 Fire Protection 9.2 Ventilation Annex A Calculation of Inrush Transient Current When Connecting Capacitor Bank into Electric Network Explanation of Wording in this code