標準編號:	GB 50169-2006
中文名稱:	電氣裝置安裝工程接地裝置施工及驗收規范
英文名稱:	Code for construction and acceptance of grounding connection electric equipment installation engineering
中標分類:	P63    供、配電工程
行業分類:	GB    國家標準
ICS分類:	91.140.50 91.140.50    供電系統 91.140.50
發布機構:	建設部 國家質量監督檢驗檢疫總局
發布日期:	2006-07-20
實施日期:	2006-11-1
標準狀態:	superseded
被新標準替代:	GB 50169-2016 電氣裝置安裝工程 接地裝置施工及驗收規范
被替代日期:	2017-4-1
替代舊標準:	GB 50169-1992 電氣裝置安裝工程接地裝置施工及驗收規范
翻譯語言:	英文
文件格式:	PDF
中文字符數:	16000 字
翻譯價格(元):	500.0
交付時間:	付款后 1 個工作日

1.0.1 To ensure construction quality of grounding connection installation engineering, facilitate improvement of engineering construction technology and ensure safe operation of grounding connection, lay down this Code especially. 1.0.2 This Code applies to construction and acceptance of grounding connection electric equipment installation engineering. 1.0.3 Installation of grounding connection shall be performed by construction unit according to approved design requirements. Client and supervision unit shall assign person to supervise the installation work. 1.0.4 Equipment and material used for grounding connection construction shall meet current national standard and with certificates. 1.0.5 Safety technical measures in construction shall meet requirements in this Code and relevant safety standard. 1.0.6 Installation of grounding connection shall coordinate with construction of civil work. Carry out intermediate inspection and acceptance record for part to be concealed before covering together with associated unit. 1.0.7 Connection of various grounding connections and main grounding grid must be reliable. Welding quality of grounding connection shall meet stipulations in Clause 3.4.2 of this Code. Grounding, resistance shall conform to design requirements and connection between expanded grounding grid and the original grounding grid shall be multi-point connection. 1.0.8 Acceptance testing of grounding connection shall be carried out immediately after completion of civil work; grounding connection in high soil resistivity area shall be taken with corresponding measures according to design requirement and put into operation only after acceptance when the ground resistance fails to meet requirements. 1.0.9 Construction and acceptance of grounding connection shall meet requirements in current national code and specification besides that in this Code.

1 General provisions 2 Terms and Definitions 3 Grounding of Electric Equipment 3.1 General 3.2 Selection of Grounding Connection 3.3 Laying of Grounding Connection 3.4 Connection of Grounding Conductor (Wire) 3.5 Grounding of Lightning Rod (Wire, Strip, Grid) 3.6 Grounding of Portable and Movable Electric Equipment 3.7 Grounding of Transmission Line Pole Tower 3.8 Grounding of Secondary System of Control Building, Communication Station and Microwave Station 3.9 Grounding of Metal Protective Layer of Power Cable Termination 3.10 Grounding of Power Distribution Electric Equipment 3.11 Grounding of Electric Equipment of Building 4 Engineering Acceptance for Hand Over Explanation of Wording in this code