標準編號:	GB 29551-2013
中文名稱:	建筑用太陽能光伏夾層玻璃
英文名稱:	Laminated solar PV glazing materials in building
中標分類:	Q33    建筑玻璃
行業分類:	GB    國家標準
ICS分類:	81.040.20 81.040.20    建筑玻璃 81.040.20
發布機構:	中華人民共和國國家質量監督檢驗檢疫總局 中國國家標準化管理委員會
發布日期:	2013-7-19
實施日期:	2014-5-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	32000 字
翻譯價格(元):	1920.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies terms and definitions, classification, materials, requirements, test methods, inspection rules, packaging, marking, transport and storage of laminated solar PV glazing materials in building. This standard is applicable to crystalline silicon cell type and thin-film cell type laminated solar PV glazing materials in buildings. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 308 Rolling bearings - Steel balls GB/T 531.1 Rubber vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Duromerer method (Shore hardness) GB/T 1216 External micrometer GB/T 5137.3-2002 Test methods of safety glazing materials used on road vehicles - Part 3: Radiation, high temperature, humidity, fire and simulated weathering resistance tests GB/T 9056 Metal ruler GB 11614 Flat glass GB 15763.1 Safety glazing materials in building - Part 1: Fire-resistant glass GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass GB 15763.4 Safety glazing materials in building - Part 4: Heat soaked thermally tempered glass GB/T 17841 Heat strengthened glass GB/T 21389 Vernier, dial and digital display calipers JC/T 677 Test method to model wind pressure for architectural glass under the uniform static loads JC/T 1006 Enamelled tempered and heat-strengthened glass IEC 61215: 2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval IEC 61646: 2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 laminated solar PV glazing materials

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Materials 6 Requirements 7 Test methods 8 Inspection rules 9 Packaging, marking, transport and storage Annex A (Normative) Holder for falling ball impact test Annex B (Normative ) Test device for shot-bag impact performance Annex C (Normative) Forcemeter Annex D (Informative) Calibration of shot-bag impact rating test frames