標準編號:	GB 18100.1-2010
中文名稱:	摩托車照明和光信號裝置的安裝規定　第1部分：兩輪摩托車
英文名稱:	Provisions for installation of lighting and light-signaling devices for motorcycles—Part 1:Two wheels motorcycle
中標分類:	T38    照明與信號設備
行業分類:	GB    國家標準
ICS分類:	43.040.20 43.040.20    照明、信號和報警設備 43.040.20
發布機構:	國家標準化委員會 國家質量監督檢驗檢疫總局
發布日期:	2011-1-10
實施日期:	2012-1-1
標準狀態:	superseded
被新標準替代:	GB 18100-2025 摩托車和輕便摩托車道路照明及光信號裝置的安裝規定
被替代日期:	2026-1-1
替代舊標準:	:GB 18100-2000
翻譯語言:	英文
文件格式:	PDF
中文字符數:	13000 字
翻譯價格(元):	840.0
交付時間:	付款后 1 個工作日

1 Scope This Part of GB 18100 specifies the general and specific requirements for the installation of lighting and light-signaling devices for Category L3 two wheels motorcycle. This Part applies to two wheels motorcycle (hereinafter referred to as the vehicles). 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of GB 18100. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies. GB 4599 Motor Vehicle Headlamps Equipped with Filament Lamps GB 4660 Motor Vehicle Front Fog Lamps Equipped with Filament Lamps GB 4785 Prescription for Installation of the External Lighting and Light-Signaling Devices for Motor Vehicles and Their Trailers GB 5948 Photometric Characteristics of Motorcycle Headlamps Equipped with Filament Light Sources GB 11554 Photometric Characteristics of Rear Fog Lamp for Power-Driven Vehicles and Their Trailers GB 11564 Retro-Reflector Device for Motor Vehicles GB 17509 Photometric Characteristics of Direction Indicators for Motor Vehicles and Their Trailers GB 17510 Photometric Characteristics of Light-Signaling Devices for Motorcycles 3 Terms and Definitions For the purposes of this Part, the terms and definitions established in GB 4785 apply. 4 Requirements 4.1 Basic requirements 4.1.1 Lighting and signaling devices shall be installed so that under normal working conditions, despite the vibrations to which they may be subjected, they continue to function in accordance with the provisions set out in this Part; in particular, the start adjustment state shall not be altered.

Foreword 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Special Requirements 6 Inspection Rules Appendix A (Normative) Non-visibility of Front-view Red Light and Rear-view White Light