Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
All the technical contents of this standard are mandatory.
This standard was drafted according to the rules given in GB/T 1.1-2009.
This standard supersedes "Wool" (GB 1523-1993).
There have been some significant changes in this standard over GB 1523-1993 in the following aspects:
- The terminologies and definitions of the important standard - "Sheep Wool" were revised again;
- "Category and class" in technical requirements were changed to "model and specification", and the technical requirements were detailed;
- The requirements of faulty wool and vegetable matter content were added;
- The allowable content of each model of coarse wool hair was defined, and the operability of this standard was enhanced;
- The calculation methods for wool base and vegetable matter base were added;
- The clean wool content and skirting wool content of the wool with specification of A or B were specified.
This standard was proposed by and is under the jurisdiction of China Fiber Inspection Bureau.
Drafting organizations of this standard: China Fiber Inspection Bureau, National Animal Husbandry Station, All China Federation of Supply and Marketing Cooperatives, Department of Inspection Supervision of AQSIQ, China Wool Textile Association, Nanjing Wool Market, Jiangsu Sunshine Group Co., Ltd., Shanghai Shenyi Wooltop Co., Ltd., Wuxi Xiexin Group Co., Ltd., Inner Mongolia Autonomous Region Fiber Inspection Bureau, Jiangsu Fiber Inspection Bureau and Xinjiang Uygur Autonomous Region Fiber Inspection Bureau.
Chief drafters of this standard: Du Shuying, Wang Xiaoping, Mao Jianxin, Ma Jianyuan, Yi Feng, Zhang Feng, He Liang, Zhao Ying, Chen Gang, Song Zhenxiang, Liu Zhenjiang and Liu Changchun.
This standard was firstly issued in 1993 and is revised for the first time.
Sheep Wool
綿羊毛
1 Scope
This standard specifies the model, specification (grade), technical requirements, inspection methods, inspection rules, and packaging, marking, storage and transportation of sheep wool.
This standard is applicable to quality determination of sheep wool (including superfine sheep wool, fine sheep wool, medium fine sheep wool, improved sheep wool and native sheep wool) during production, transaction, processing, quality supervision and import and export inspection.
2Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6976 Test Method for Measure Length of the Wool Staple Natural Formation
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values
GB/T 10685 Wool - Determination of Fiber Diameter - Projection Microscope Method
GB/T 14270 Test Method for Fiber Type Content of Hair Fibers
GB/T 21030 Test Method for the Mean and Distribution of Fibre Diameter of Wool and Other Animal Fibre - Optical Fibre Diameter Analyser (OFDA)
GB/T 27629 Determination of Breaking Tenacity of Animal Fibre Bundles
IWTO-12 Measurement of the Mean and Distribution of Fibre Diameter Using the Sirolan-Laserscan Fibre Diameter Analyser
3Terminologies and Definitions
For the purposes of this document, the following terminologies and definitions apply.
3.1
Sheep wool
Wool fibre growing on sheep body, which is referred to as wool.
3.2
Superfine wool
Homogeneous fleece with mean fibre diameter of 19.0 μm or above.
3.3
Fine wool
Homogeneous fleece with mean fibre diameter of 19.1 μm~25.0 μm.
3.4
Medium fine wool
Homogeneous fleece with mean fibre diameter of 25.1 μm~55.0 μm.
3.5
Improved wool
Wool fibre growing on the crossbred sheep in the process of improvement but having not yet reached homogeneous level.
3.6
Native wool
Wool fibre growing on the sheep which has not yet been improved and has the characteristics of primitive breeds.
3.7
Fleece wool
Wool obtained from live sheep, interconnecting between staples and in tight net form.
3.8
Greasy wool
Wool without treatment of washing, solvent degreasing, carbonization, etc.
3.9
Quality number
Corresponding fineness characteristic index of wool specified by the mean fibre diameter (μm) (see Appendix A).
3.10
Coarse wool hair
Coarse wool refers to the wool fibre in diameter of 52.5 μm or above. Cavity hair refers to the wool fibre of medullary cavity, of which the length is 25mm or above in the projected image by 500× microscope.
3.11
Kemp hair
Coarse wool in oblate cross section and U shape and with developed medulla and very thin or no cortical layer, of which the fibres are dry, white, vulnerable and easily broken, and hard to be dyed.
3.12
Homogeneous fleece
Wool composed of the wool fibres of the same type.
3.13
Partial homogeneous fleece
Among the staples on a fleece wool, most of them are in homogeneous fleece pattern and small part of them are in heterogeneous fleece pattern.
3.14
Heterogeneous fleece
Wool composed of the wool fibres of the different types.
3.15
Heterotypical hair
Wool containing two kinds of fibre forms, i.e., medullated wool and non-medullated wool, on one stick of wool fibre.
3.16
Skirting wool
Wool cut off from the edge of fleece wool and obviously different from the main body fleece.
3.17
Head leg and tail wool
Wool cut from the head, leg and tail part of sheep.
3.18
Non-wool fibre
Other fibres blended in wool fibre.
3.19
Second cuts
Wefty wool repeatedly cut off during wool clipping.
3.20
Faulty wool, defective wool
Defective wool, including: stamped wool, canary stained wool, dung stained wool, burry wool, heavy cotted wool, coloured wool, dermatitis and acariasis wool, and tender wool.
3.20.1
Stamped wool
Stained wool for the purpose of marking on sheep body, e.g., dyed wool, tar-stained wool, painted wool, used oil-stained wool, and other colour-stained wool.
3.20.2
Canary stained wool
Wool being stained to become yellow and with thestained part exceeding more than 50% of the staple length.
3.20.3
Dung stained wool; dag wool
Wool being seriouslystained by dung.
3.20.4
Burry wool
Wool containing such area concentrated with vegetable grass.
3.20.5
Heavy cotted wool
Wool containing such wool fibres which are in cotted form, will not be in single fibres and have severe reduction of strength if being torn.
3.20.6
Coloured wool
Heterochromous wool contained in wool fibres.
3.20.7
Dermatitis and acariasis wool
Wool obtained from the sheep having dermatitis and acariasis, with scab or scurf.
3.20.8
Tender wool
Wool containing such a part of fibres with obvious small diameter and strength due to such factors as malnutrition or disease during the growth of sheep.
3.21
Yield
Percentage of the conventional mass of cleaned wool to the mass of greasy wool.
3.22
Clean wool content
Percentage of the corrected value of absolute dry mass of wool after being cleaned and cleared of impurities, per conventional moisture regain and conventional grease content, to the mass of greasy wool.
3.23
Lot sample
Wool sample that taken from bulk goods or batched goods for trading.
3.24
Subsample
Sample being randomly taken from the lot sample to represent the lot sample.
3.25
Wool base
Percentage of the absolute dry mass of wool free from any impurities to the mass of subsample.
3.26
Vegetable matter base
Percentage of the absolute dry mass of wool free from such vegetable matters as ash and burr of ethanol extractives to the mass of subsample.
3.27
Test specimen
Sample for test, which randomly taken from the dry and cleaned subsample.
3.28
Total alkali-insoluble matter
All the alkali-insoluble matters free from ash and ethanol extractives, which are expressed in the percentage to the absolute dry mass of test specimen.
3.29
Ethanol extractives
Wool grease and other matters soluble via extraction with ethanol as solvent, which is expressed in the percentage to the absolute dry mass of test specimen.
3.30
Ash
Residue of test specimen after being heated, burnt and incinerated at 750℃±50℃, which is expressed in the percentage to the absolute dry mass of test specimen.
3.31
Fibre diameter
Degree of fineness of wool fibre, which is expressed in the diameter of wool fibre (μm).
3.32
Mean fibre diameter
Mean of wool fibre diameter.
3.33
CV of mean fibre diameter
Variation degree of the diameter of wool fibre.
3.34
Staple length
Linear distance between the mean value point at top end and the root end of a bundle of wool fibres at natural crimp condition.
3.35
Mean staple length
Arithmetic mean value of the staple length of wool fibres at natural crimp condition.
3.36
CV of mean staple length
Variation degree of the mean staple length of wool fibres at natural crimp condition.
4Technical Requirements
4.1 The homogeneous wool shall be classified by model and specification, as detailed in Table 1.
Table 1 Classification of Homogeneous Wool by Model and Specification
Model Specification Assessment indexes
Range of mean diameter/μm Length Quantity percentage of coarse wool hairs or kemp hairs/%
≤ Mass fraction of faulty wool /%
≤ Content of vegetable matter/%
≤
Mean staple length/mm
≥ Minimum staple length/mm
≥ Quantity percentage of shortest staples/%
≤
YM/14.5 A ≤15.0 70 40 2.5 Coarse wool hair
0.0 0.5 1.0
B 65
C 50
YM/15.5 A 15.1~16.0 70 1.0
B 65 1.5
C 50
YM/16.5 A 16.1~17.0 72 1.0
B 65 1.5
C 50
YM/17.5 A 17.1~18.0 74 1.0
B 68 1.5
C
50
YM/18.5 A 18.1~19.0 76 1.0
B 68 1.5
C 50
YM/19.5 A 19.1~20.0 78 1.0
B 70 1.5
C 50
YM/20.5 A 20.1~21.0 80 1.0
B 72 1.5
C 55
YM/21.5 A 21.1~22.0 82 50 3.0 2.0 1.0
B 74 1.5
C 55
YM/22.5 A 22.1~23.0 84 1.0
B 76 1.5
C 55
YM/23.5 A 23.1~24.0 86 1.0
B 78 1.5
C 60
YM/24.5 A 24.1~25.0 88 50 3.0 Coarse wool hair
0.0 2.0 1.0
B 80 1.5
C 60
YM/26.0 A 25.1~27.0 90 60 4.5 Kemp hair
0.3 1.0
B 82 1.5
C 70
YM/28.0 A 27.1~29.0 92 1.0
B 84 1.5
C 70
YM/31.0 A 29.1~33.0 110 70 1.0
B 90 1.5
YM/35.0 A 33.1~37.0 110
B 90 1.0
YM/41.5 A 37.1~46.0 110 1.5
B 90
YM/50.5 A 46.1~55.0 110 1.0
B 90 1.5
YM/55.1 A ≥55.1 60 - - Kemp hair
1.5 -
B 40 - - Kemp hair
5.0 -
4.2The technical requirements of homogeneous wool are as follows:
Foreword II
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Technical Requirements
5 Inspection Methods
6 Inspection Rules
7 Inspection Certificate
8 Packaging, Marking, Storage and Transportation
Appendix A (Informative) Corresponding Values of Wool Diameter and Quality Number
Appendix B (Informative) Determination of the Influence of Flotage and Convection Effect
Appendix C (Informative) Calibration of Pneumatic Tester
綿 羊 毛
1 范圍
本標準規定了綿羊毛的型號、規格(等級)、技術要求、檢驗方法、檢驗規則以及包裝、標志、儲存和運輸。
本標準適用于綿羊毛(包括超細綿羊毛、細綿羊毛、半細綿羊毛、改良綿羊毛、土種綿羊毛)的生產、交易、加工、質量監督和進出口檢驗中的質量鑒定。
2規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。
GB/T 6976羊毛毛叢自然長度試驗方法
GB/T 8170數值修約規則與極限數值的表示和判定
GB/T 10685羊毛纖維直徑試驗方法 投影顯微鏡法
GB/T 14270毛絨纖維類型含量試驗方法
GB/T 21030羊毛及其他動物纖維平均直徑與分布試驗方法 纖維直徑光學分析儀法
GB/T 27629毛絨束纖維斷裂強度試驗方法
IWTO-12賽羅(Sirolan)激光掃描纖維直徑分析儀測定平均纖維直徑及纖維直徑分布的方法(Measurement of the mean and distribution of fibre diameter using the sirolan-lasersean fibre diameter analyser)
3術語和定義
下列術語和定義適用于本文件。
3.1
綿羊毛sheep wool
生長在綿羊身上的毛纖維，簡稱羊毛。
3.2
超細羊毛superfine wool
纖維平均直徑在19.0 μm及以下的同質毛。
3.3
細羊毛fine wool
纖維平均直徑在19.1 μm～25.0 μm的同質毛。
3.4
半細羊毛 medium fine wool
纖維平均直徑在25.1 μm～55.0 μm的同質毛。
3.5
改良羊毛improved wool
生長在改良過程中的雜交綿羊身上的、未達到同質的毛纖維。
3.6
土種羊毛native wool
生長在未經改良、具有原始品種特征的綿羊身上的毛纖維。
3.7
套毛 fleece wool
從活羊身上取得的、毛叢間相互連接、呈緊密網狀的羊毛。
3.8
含脂毛 greasy wool
未經過洗滌、溶劑脫脂、碳化或其他方法處理的羊毛。
3.9
品質支數quality number
羊毛按纖維平均直徑微米數所規定的相應細度表征指標(參見附錄A)。
3.10
粗腔毛 coarse wool hair
粗毛是指直徑在52.5 μm及以上的毛纖維。腔毛是指髓腔在500倍顯微放大投影像中長度達25 mm及以上的毛纖維。
3.11
干死毛kemp hair
橫截面呈扁圓、馬蹄形狀，毛髓發達，皮質層很薄或無的粗毛。纖維外觀干枯，色澤呆白，脆弱易斷，染色困難。
3.12
同質毛homogeneous fleece
由同一類型毛纖維組成的羊毛。
3.13
基本同質毛partial homogeneous fleece
在一個套毛上的各個毛叢，大部分為同質毛形態，少部分為異質毛形態。
3.14
異質毛heterogeneous fleece
由不同類型毛纖維組成的羊毛。
3.15
兩型毛heterotypical hair
在同一根毛纖維上具有有髓毛和無髓毛兩種纖維形態的羊毛。
3.16
邊肷毛skirting wool
從套毛周邊除下的、與正身毛有明顯差異的羊毛。
3.17
頭腿尾毛head leg and tail wool
從綿羊身上剪下的頭部、腿部、尾部的羊毛。
3.18
異性纖維non-wool fibre
羊毛纖維中混入的其他纖維。
3.19
重剪毛second cuts
剪毛時重復剪下的短羊毛。
3.20
疵點毛faulty wool，defective wool
有缺陷的羊毛。包括：印記毛、黃殘毛、糞污毛、草刺毛、硬氈片毛、花毛、疥癬毛及弱節毛。
3.20.1
印記毛stamped wool
在綿羊身上作標記的沾色羊毛，如染色的毛、瀝青毛、油漆毛、廢機油毛等有色污染毛。
3.20.2
黃殘毛canary stained wool
污染變黃且污染部分超過毛叢長度50％以上的羊毛。
3.20.3
糞污毛dung stained wool；dag wool
被糞便嚴重污染的羊毛。
3.20.4
草刺毛burry wool
羊毛中含植物性草雜密集區的羊毛。
3.20.5
硬氈片毛heavy cotted wool
毛纖維結成氈片，撕扯后非單根纖維狀，毛纖維強力嚴重下降的羊毛。
3.20.6
花毛 coloured wool
毛纖維中夾有的異色羊毛。
3.20.7
疥癬毛dermatitis and acariasis wool
從患有疥癬病的綿羊身上取得的羊毛，帶有結痂或皮屑。
3.20.8
弱節毛tender wool
因綿羊生長時營養不良或疾病等因素，導致纖維的一部分直徑明顯變細、強力降低的羊毛。
3.21
洗凈率yield
羊毛洗凈后的公定質量占含脂毛質量的百分數。
3.22
凈毛率 clean wool content
羊毛經洗滌、去除雜質后的絕干質量，以公定回潮率和公定含油脂率修正后的質量占含脂毛質量的百分數。
3.23
批樣lot sample
從大宗散批、交易貨批中扦取的羊毛樣品。
3.24
子樣subsample
從批樣中隨機扦取的代表批樣的樣品。
3.25
毛基wool base
不含任何雜質的羊毛絕干質量占子樣質量的百分數。
3.26
植物性雜質基vegetable matter base
不含灰分和乙醇萃取物的草刺等植物性雜質的絕干質量占子樣質量的百分數。
3.27
試樣test specimen
從干燥的洗凈子樣中隨機扦取用于測試的樣品。
3.28
總堿不溶物total alkali-insoluble matter
不含灰分和乙醇萃取物的所有堿不溶性物質，用占試樣絕干質量的百分數表示。
3.29
乙醇萃取物ethanol extractives
用乙醇作溶劑，經過萃取溶于乙醇的羊毛油脂等物質，用占試樣絕干質量的百分數表示。
3.30
灰分ash
試樣在750℃±50℃加熱灼燒灰化后的殘余，用占試樣絕干質量的百分數表示。
3.31
纖維直徑 fibre diameter
羊毛纖維的粗細程度，用羊毛纖維直徑微米(μm)數表示。
3.32
平均纖維直徑 mean fibre diameter
羊毛纖維直徑的平均值。
3.33
纖維直徑變異系數CV of mean fibre diameter
羊毛纖維直徑大小變化的程度。
3.34
毛叢長度staple length
一束羊毛纖維在自然卷曲狀態下，梢端平均值點至根端間的直線距離。
3.35
平均毛叢長度mean staple length
羊毛纖維在自然卷曲狀態下毛叢長度的算術平均值。
3.36
毛叢長度變異系數CV of mean staple length
羊毛纖維在自然卷曲狀態下的平均毛叢長度長短變化的程度。
4技術要求
4.1 同質羊毛按型號、規格分類，見表1。
表1 同質羊毛按型號、規格分類
型號 規格 考核指標
平均直徑
范圍/μm 長度 粗腔毛或干死毛根數百分數/％
≤ 疵點毛質
量分數/％
≤ 植物性雜
質含量/％
≤
毛叢平均
長度/mm
≥ 最短毛叢長度/mm
≥ 最短毛叢個數百分數/％
≤
YM/14.5 A ≤15.0 70 40 2.5 粗腔毛
0.0 0.5 1.0
B 65
C 50
YM/15.5 A 15.1～16.0 70 1.0
B 65 1.5
C 50
YM/16.5 A 16.1～17.0 72 1.0
B 65 1.5
C 50
YM/17.5 A 17.1～18.0 74 1.0
B 68 1.5
C 50
YM/18.5 A 18.1～19.0 76 1.0
B 68 1.5
C 50
YM/19.5 A 19.1～20.0 78 1.0
B 70 1.5
C 50
YM/20.5 A 20.1～21.0 80 1.0
B 72 1.5
C 55
YM/21.5 A 21.1～22.0 82 50 3.0 2.0 1.0
B 74 1.5
C 55
YM/22.5 A 22.1～23.0 84 1.0
B 76 1.5
C 55
YM/23.5 A 23.1～24.0 86 1.0
B 78 1.5
C 60
表1(續)
型號 規格 考核指標
平均直徑
范圍/μm 長度 粗腔毛或干死毛根數百分數/％
≤ 疵點毛質
量分數/％
≤ 植物性雜
質含量/％
≤
毛叢平均
長度/mm
≥ 最短毛叢
長度/mm
≥ 最短毛叢個數百分數/％
≤
YM/24.5 A 24.1～25.0 88 50 3.0 粗腔毛
0.0 2.0 1.0
B 80 1.5
C 60
YM/26.0 A 25.1～27.0 90 60 4.5 干死毛
0.3 1.0
B 82 1.5
C 70
YM/28.0 A 27.1～29.0 92 1.0
B 84 1.5
C 70
YM/31.0 A 29.1～33.0 110 70 1.0
B 90 1.5
YM/35.0 A 33.1～37.0 110
B 90 1.0
YM/41.5 A 37.1～46.0 110 1.5
B 90
YM/50.5 A 46.1～55.0 110 1.0
B 90 1.5
YM/55.1 A ≥55.1 60 干死毛
1.5
B 40 干死毛
5.0
4.2異質羊毛技術要求見下：
a)改良羊毛技術要求見表2。
表2改良羊毛技術要求
等別 毛叢平均長度/mm 粗腔毛或干死毛根數百分數/％
改良一等 ≥60 ≤1.5
改良二等 ≥40 ≤5.0
b) 土種羊毛按相關標準執行。
4.3主觀評定羊毛的型號、規格時，可跨上、下各一檔，如有爭議則以客觀檢驗結果為準。
4.4毛叢強度介于25 N/ktex～20 N/ktex的為弱節毛，低于20 N/ktex的為嚴重弱節毛。
4.5凈毛率按照實際檢測結果標注。
4.6邊肷毛質量分數≤1.5％。
4.7花毛應單獨包裝，并加以說明。
4.8散毛及邊肷毛應單獨包裝，并加以說明。
4.9頭腿尾毛、草刺毛及其他有使用價值的疵點毛，分別單獨包裝，并加以說明。
4.10印記毛、重度污染毛應撿出，單獨包裝，并加以說明。
5檢驗方法
5.1取樣
5.1.1取樣方法
5.1.1.1品質樣品的扦取
品質樣品采用開包方式扦取，在毛包兩端和中間部位分別隨機扦取足能代表本批羊毛品質的樣品。
5.1.1.2批樣的扦取
用于檢驗的毛包應逐包過磅并鉆芯。鉆芯方向應平行于毛包打包方向或垂直于套毛堆疊方向，鉆孔深度應大于毛包長度的50％，鉆孔點距離毛包邊緣應大于75 mm。所有鉆芯樣品應在8 h內稱取質量，精確至0.1 g。應去除鉆芯樣品中的所有包裝材料，并將鉆芯樣品放入密閉的容器內。稱取的批樣樣品質量記作W。
5.1.1.3子樣的扦取
批樣稱取質量后進行混樣，混樣可采用機械和人工兩種方法進行。待樣品充分混合均勻后進行分樣。將批樣平鋪在工作臺上，鋪成的樣品厚度在30 mm～60 mm之間，可用兩分法、四分法等方法將樣品分成16等份，再從每份中隨機扦取樣品至200 g，共5個子樣。也可用多點取樣方法，即在鋪好的樣品上均勻找好20個點進行取樣，再將樣品翻轉使其反面朝上，均勻找好20個點進行取樣，直至樣品質量為200 g，共5個子樣。其余部分作為備樣保存。
將扦取的子樣和剩余樣品稱取質量，精確至0.1 g。5個子樣質量和剩余樣品質量相加得到的質量為Wb。W/Wb為子樣質量修正系數。
5.1.2取樣數量
5.1.2.1 品質樣品
每20包取1包，從中取出不少于1 kg樣品。不足20包按20包計。100包以上每增加30包增取1包，不足30包按30包計。每批樣品總質量不少于15 kg。將所取的羊毛品質樣品稱計質量，記作Wp。
5.1.2.2批樣
鉆芯扦取的批樣總質量不少于1 200 g。
5.1.2.3子樣
扦取的子樣質量為200 g。
5.2檢驗
5.2.1 纖維直徑
在收購環節可采取主觀方法判定，如有爭議，則以客觀檢驗結果為準。
5.2.2毛叢自然長度
按GB/T 6976進行檢驗。
5.2.3 毛叢強度
按GB/T 27629進行檢驗。
5.2.4粗腔毛或干死毛含量
按GB/T 14270進行檢驗。
5.2.5疵點毛和邊肷毛
5.2.5.1檢驗
將所取的羊毛品質樣品平鋪在工作臺上，從中分揀出疵點毛和邊肷毛，分別稱取質量并分別記作Wc和Wk。
5.2.5.2疵點毛質量分數的計算
按式(1)計算疵點毛質量分數：
…………………………(1)
式中：
C——疵點毛質量分數，％(精確至0.01)；
Wc——疵點毛質量，單位為千克(kg)(精確至0.01 kg)；
Wp——全批羊毛品質樣品質量，單位為千克(kg)(精確至0.1 kg)。
5.2.5.3邊肷毛質量分數的計算
按式(2)計算邊肷毛質量分數：
…………………………(2)
式中：
K——邊肷毛質量分數，％(精確至0.01)；
Wk——邊肷毛質量，單位為千克(kg)(精確至0.01 kg)；
Wp——全批羊毛品質樣品質量，單位為千克(kg)(精確至0.1 kg)。
5.3凈毛率、凈毛公量
5.3.1 去除包裝物和捆扎物后的羊毛質量的計算
全批貨物的毛包均應稱計毛包質量，精確至0.01 kg，并扣除包裝物和捆扎物質量，按式(3)計算貨物去除包裝物和捆扎物后的羊毛質量：
Wn=Wg-Wt ……………………………(3)
式中：
Wn——去除包裝物和捆扎物后的羊毛質量，單位為千克(kg)(精確至0.1 kg)；
Wg——毛包過磅總質量，單位為千克(kg)(精確至0.1 kg)；
Wt——總包裝物和捆扎物質量，單位為千克(kg)(精確至0.1kg)。
5.3.2子樣的洗滌和烘干
5.3.2.1儀器和用具
儀器和用量主要有：
a)洗毛設備：洗毛槽，有效容量10 L以上或能滿足檢測要求，并附有雙層銅絲網夾底(每25 mm 100目)和適宜的排水系統；
b)離心脫水機；
c) 非離子型洗滌劑，濃度0.3％～0.4％；
d) 烘箱(附有最小分度值0.01 g的箱內天平和恒溫控制裝置)；
e)強制式快速烘干器。
5.3.2.2試驗步驟
5.3.2.2.1 洗滌子樣
第一次：漂洗(水溫35℃～45℃)，1 min；
第二次：洗滌(水溫52℃±3℃)，3 min：
第三次：漂洗(水溫35℃～45℃)，1.5 min；
第四次：洗滌(水溫52℃±3℃)，3 min；
第五次：漂洗(水溫35℃～45℃)，1.5 min：
第六次：漂洗(水溫35℃～45℃)，1.5 min。
洗滌后應收集篩網上的短毛及所有雜質，用洗滌分離法去除泥沙和其他外來雜質，將收集的短毛和植物性雜質合并至子樣內。如洗滌時有羊毛纖維和植物性雜質的散失，需對損失進行修正。散失的羊毛纖維和植物性雜質的平均損失不得大于洗滌子樣質量的0.3％。
5.3.2.2.2烘干子樣
將洗滌后的子樣脫水，放入105℃±2℃烘箱內烘至恒重，稱重精確至0.01 g。如在非標準大氣下進行烘干，則樣品的質量應進行溫濕度修正，修正系數查見表B.1和表B.2。在箱外稱重，應進行浮力和對流修正。測定浮力和對流效應影響的方法參見附錄B。
5.3.3 乙醇萃取物、灰分、植物性雜質和總堿不溶物含量
5.3.3.1 乙醇萃取物
5.3.3.1.1儀器設備和試劑
a)索氏萃取器；
b)恒溫水浴鍋；
c)恒溫烘箱；
d)分析天平：最小分度值0.001 g；
e) 乙醇(分析純，濃度不低于94％)。
5.3.3.1.2試驗步驟
從每份洗凈烘干的子樣中隨機稱取5 g試樣一份，試樣質量按規定進行修正。將試樣用過濾紙包好后放入浸抽器內，下接已烘至恒重的蒸餾瓶，注入溶劑，將蒸餾瓶置于水浴鍋中，使溶劑蒸發上升，冷凝回流，每次測試的回流總次數不少于20次。萃取完畢后，取出試樣，回收溶劑，然后將蒸餾瓶放入105℃±2℃烘箱內進行烘干，烘至恒重。
5.3.3.1.3 乙醇萃取物含量計算公式
按式(4)計算乙醇萃取物含量：
……………………………(4)
式中：
Ei——乙醇萃取物含量，％(精確至0.01)；
G2——萃取后蒸餾瓶的質量，單位為克(g)(精確至0.001 g)；
G1——萃取前蒸餾瓶的質量，單位為克(g)(精確至0.001 g)；
G3——試樣絕干質量，單位為克(g)(精確至0.001 g)。
5.3.3.2灰分
5.3.3.2.1 儀器設備
a) 高溫爐；
b)坩堝，50 mL；
c)分析天平，最小分度值0.001 g。
5.3.3.2.2 試驗步驟
從每份洗凈烘干的子樣中，隨機稱取10 g試樣一份，試樣質量按規定進行修正。將試樣放入已烘至恒重的坩堝內，在煤氣燈上加熱，盡量去除揮發性物質，再將坩堝移入高溫爐，在750℃±50℃的溫度下灼燒，直至所有含碳物質全部灰化為止。取出坩堝，放在干燥器內，冷卻到室溫，然后進行稱量，稱至恒重。
