標準編號:	GB 14569.3-1995
中文名稱:	低、中水平放射性廢物固化體性能要求 瀝青固化體
英文名稱:	Characteristic requirements for solidified waste of low-and intermediate-level radioactive waste--Bitumen solidified waste
中標分類:	F75    放射性三廢處理
行業分類:	GB    國家標準
ICS分類:	27.120.30 27.120.30    裂變物質 27.120.30
發布機構:	國家技術監督局
發布日期:	1995-12-13
實施日期:	1996-8-1
標準狀態:	valid
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	120.0
交付時間:	付款后 1 個工作日

1 Subject Content and Application Scope This standard specifies the minimum characteristic requirements and inspection methods for bitumen solidified waste in low-and intermediate-level radioactive wastes (hereinafter referred to as bitumen solidified waste). This standard is applicable to the bitumen solidified waste disposed near surface; With regard to the bitumen solidified waste disposed in rock cavities, this standard may apply as a reference. 2 Normative References GB/T 267 Petroleum products-Determination of flash and fire points GB/T 4507 Test method for softening point of petroleum bitumens GB/T 7023 Long-term leach testing of solidified radioactive waste forms GB 9132 Regulations for shallow ground disposal of solid low and intermediate- level radioactive wastes GB 9133 Classification of radioactive waste GB 11806 Regulations for the Safe Transport of Radioactive Material GB 13600 Regulations for disposal of solid low and intermediate level radioactive wastes in rock cavities 3 Radioactive Specific Activity Limit of Bitumen Solidified Waste Radioactive specific activity of bitumen solidified waste must meet the relevant regulations and requirements of GB 9132 and GB 9133. 4 Performance Requirements Performance of bitumen solidified waste must meet the relevant regulations and requirements of GB 9132, GB 11806 and GB 13600. 4.1 Unevenness Unevenness of waste distributed in bitumen solidified waste shall not be greater than 2o. 4.2 Water ratio Water ratio of concentrated liquid waste bitumen solidified waste shall not be greater than 1% of weight of solidified waste. Water ratio of spent resin bitumen solidified waste shall not be greater than 3% of weight of solidified waste. 4.3 Waste capacity Waste capacity in bitumen solidified waste shall not be greater than 50% of weight of solidified waste. 4.4 Softening point Softening point of bitumen solidified waste shall not be less than 55 C. 4.5 Water resistance 4.5.1 Leachability resistance When bitumen solidified waste sample is leached from 25℃ deionized water, leaching rate limit of 42d nuclide shall be respectively: