標準編號:	FZ/T 94047-2012
中文名稱:	分條整經機
英文名稱:	Sectional Warping Machine
中標分類:	W94    織部機械與器具
行業分類:	FZ    紡織行業標準
ICS分類:	59.120.30 59.120.30    織機、織造機器 59.120.30
發布機構:	中華人民共和國工業和信息化部
發布日期:	2012-12-28
實施日期:	2013-6-1
標準狀態:	valid
替代舊標準:	FZ/T 94047-1999 分條整經機
翻譯語言:	英文
文件格式:	PDF
中文字符數:	4000 字
翻譯價格(元):	120.0
交付時間:	付款后 1 個工作日

1 Scope This standard specifies the type, main technical parameters, technical requirements, testing methods, inspection rules, marking, packaging, transportation and storage of sectional warping machine. This standard is applicable to sectional warping machine used for the warping of cotton, wool, linen, silk, chemical fibre and blended yarn. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 5226.1 Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements GB/T 7111.6 Textile Machinery - Noise Test Code - Part 6: Fabric Manufacturing Machinery GB/T 8461 Textile Machinery and Accessories - Cone Sectional Warping Machines - Maximum Usable Width GB/T 9239.1-2006 Mechanical Vibration - Balance Quality Requirements for Rotors in a Constant (Rigid) State - Part 1: Specification and Verification of Balance Tolerances GB/T 17780 Safety Requirements for Textile Machinery GB/T 20034 Textile Machinery and Accessories - Warp Creels - Main Dimensions FZ/T 90001 Product Package of Textile Machinery FZ/T 90035 Textile Machinery - Warper Beam Terms and Main Dimension FZ/T 90074 Painting for The Products of Textile Machinery FZ/T 90089.1 Type, Size and Technical Requirements for Textile Machinery Nameplate FZ/T 90089.2 Content of Textile Machinery Nameplate 3 Product Types and Main Technical Parameters 3.1 Types 3.1.1 Main engine type: moving drum and its cone taper is determined according to the request of fabric. 3.1.2 Beaming type : fixed and movable types. 3.1.3 Bobbin creel type: rectangular frame, V-shaped frame, rectangular-V-shaped complex frame. 3.2 Main technical parameters 3.2.1 Speeds of warping and beaming are less than or equal to 1 000m/min and 200m/min respectively and are both classless and adjustable. 3.2.2 Maximum effective width of sectional warping machine shall meet the requirements of GB/T 8461. 3.2.3 Drum diameter: 500mm, 800mm, 1 000mm. 3.2.4 Maximum diameter adapting to the side disk of beam: 1 250mm. 3.2.5 Main dimensions of warping beam shall meet the requirements of FZ/T 90035. 3.2.6 Main dimensions of bobbin creel shall meet the requirements of GB/T 20034.

Foreword i 1 Scope 2 Normative References 3 Product Types and Main Technical Parameters 4 Technical Requirements 5 Test Methods 6 Inspection Rules 7 Marking, Packaging, Transportation and Storage