This standard specifies the design requirements, fundamental function and characteristic, test methods and procedures of fixed monitoring device for individual surface contamination.
This standard is applicable to the fixed monitoring device for the whole individual body surface.
For the monitoring and warning device for radioactive contamination of individual surface (with or without close) stated in this standard, technical condition is only applicable to devices that the whole body, hands or feet of users present to the front of detector and do not need to take any action. But they are not applicable to the devices that users or other personnel move detector on monitoring surface or users rush through monitor.
3~6 chapter, 8~14 chapter and 7.1.2, 7.2, 7.3.2, 7.4 ~ 7.6 articles in this standard are applicable to warning device for α and/or β contamination on hands.
3~6 chapter, 8~14 chapter and 7.1.3, 7.2, 7.3.3, 7.4 ~ 7.6 articles in this standard are applicable to warning device for α and/or β contamination on feet.
1 Subject Contents and Application Scope
2 Normative References
3 Terms
4 Device Classifications
5 Design Requirements
6 Technical Requirements
7 Radiation Characteristic
8 Protection for Irritability
9 Availability
10 Environmental Conditions
11 Test Methods
12 Mark, Packing, Transportation and Storage
13 Instruction book or service book
14 Inspection Certificate
Annex A
Annex B
