標準編號:	DL 5190.5-2012
中文名稱:	電力建設施工技術規范 第5部分：管道及系統
英文名稱:	The specification of erection of electric power construction Part 5: Piping and system
行業分類:	DL    電力行業標準
發布機構:	國家能源局
發布日期:	2012-1-4
實施日期:	2012-3-1
標準狀態:	superseded
被新標準替代:	DL 5190.5-2019 電力建設施工技術規范 第5部分：管道及系統
被替代日期:	2019-10-1
替代舊標準:	DL 5031-1994 電力建設施工及驗收技術規范(管道篇)
翻譯語言:	英文
文件格式:	PDF
中文字符數:	32000 字
翻譯價格(元):	960.0
交付時間:	付款后 1 個工作日

1 General Provisions 1.0.1 This Part was revised with a view to strengthening the technical management of the pipe engineering construction and further improving the engineering quality. 1.0.2 This Part is applicable to the erection and construction of process pipes of the new-built, extended or reconstructed 1,000MW or below thermal power generation, gas turbine generation, biomass electric power generation and garbage power generation stations and the conventional islands of nuclear power. 1.0.3 This Part is not applicable to the process pipes made of the following materials: 1 Cast iron pipes and reinforced concrete pipes; 2 Nonmetallic pipe (plastics and glass reinforced plastic, etc.); 3 Non-ferrous metal pipe (titanium and copper, etc.); 4 Lined pipe; 5 Pipes of composite materials; 6 Pipes of other special materials. 1.0.4 In addition to complying with the technical requirements stated in this Part, the special erection and construction of various pipes also shall meet those specified in the relevant professional parts in the national standards and the "Technical Specification for Thermal Power Erection and Construction".

1 General Provisions 2 Terms 3 Basic Requirements 4 Inspection of Pipes, Pipe Fittings, Pipe Accessories and Valves 4.1 General Requirements 4.2 Inspection of Pipes 4.3 Inspection of Pipe Fittings 4.4 Inspection of Pipe Accessories 4.5 Factory Prefabrication of High Pressure Pipes 4.6 Inspection of Pipes after Factory Prefabrication 4.7 Inspection of Valves 5 Pipe Installation 5.1 General Requirements 5.2 Installation of High Pressure Pipes 5.3 Installation of Medium and Low Pressure Pipes 5.4 Installation of Drain and Discharge Pipes 5.5 Installation of Pipes with Φ76 and Below 5.6 Installation of Valves and Flanges 5.7 Installation of Supports and Hangers 6 Testing and Cleaning of Piping System 6.1 General Requirements 6.2 Leak Test of Piping System 6.3 Cleaning of Piping System 7 Project Documents Provided before Quality Acceptance Appendix A Requirement of Pipe Painting Color Appendix B Common Steels Data of Power Station Pipes Appendix C Material Selection of Flange Gaskets Appendix D Selection of Valve Seal Packing Appendix E Type and Gap of Common Pipe Groove Appendix F Installation Requirements of Oxygen and Acetylene Pipes Appendix G Calculation of Pipe Head Thickness Explanation of Wording in this Specification List of Quoted Standards